Setting Up And Connecting; Requirements For The Set-Up Location; Switching The Appliance On/Off - Silvercrest SVEB 160 B2 Operating Instructions Manual

Setting up and connecting

Requirements for the set-up location

For safe and trouble-free operation of the appliance, the set-up location must
fulfil the following requirements:
■ When setting up the appliance, place it on a firm, flat and horizontal
surface.
■ Do not operate the appliance in a hot, wet or extremely damp environment
or in the vicinity of flammable materials.
■ The mains power socket must be easily accessible, so that the power cable
can be easily disconnected in the event of an emergency.
Switching the appliance on/off
CAUTION – PROPERTY DAMAGE
► Before you plug in the appliance, compare the connection data (voltage
and frequency) on the rating plate with that of your mains power network.
This data must match to prevent damage to the appliance.
► Ensure that the power cable is undamaged and is not routed over hot
surfaces and/or sharp edges.
► Do not leave the mains cable hanging over any edges (tripping hazard).
♦ Insert the plug into the mains power socket.
♦ Press the
lights up.
♦ Press the
lamp r switches off.
♦ Pull the plug from the socket if you do not plan to use the appliance for an
extended period and before cleaning it.
■ 54 │ GB │ MT
button r to switch on the appliance. The control lamp r
button r again to switch off the appliance. The control
SVEB 160 B2