Load paper.
1 Pull out the paper cassette completely.
3 Pinch and slide the blue rear paper end guide
to match the size of paper.
Paper limit
Paper limit
mark
mark
5 Load the paper into the cassette. Make sure the
stack height does not exceed the limit mark.
7 Insert the paper cassette back into the
machine as far as it will go.
NOTE
If you do not completely insert the cassette into the machine, paper jams may occur.
●
Make sure the correct paper size is specified in the machine. For details, see Chapter 2,"Paper Handling," in the Basic Guide.
●
2 Turn and pull out the shipping material ➊, and
➋
press the inner plate
Set this part
to the position
of paper size
4 Pinch and slide the blue side paper end guides
to match the size of paper.
Hook
6 Press down the paper stack to make sure the
side edges of the stack sit below the hooks.
to set it on the bottom.
Hook