Download Print this page

Ventair Steampro STE31HLX Important Installation And Instruction Manual

Advertisement

Quick Links

IMPORTANT INSTALLATION AND INSTRUCTION MANUAL
Steampro
HIGH AIRFLOW HEAT, LIGHT & EXHAUST
MODEL
STE31HLX
PAGE 1

Advertisement

loading

Summary of Contents for Ventair Steampro STE31HLX

  • Page 1 IMPORTANT INSTALLATION AND INSTRUCTION MANUAL Steampro HIGH AIRFLOW HEAT, LIGHT & EXHAUST MODEL STE31HLX PAGE 1...
  • Page 2: Line Drawing

    INTRODUCTION Thank you and congratulations on your purchase of the Ventair Steampro three in one bathroom unit. Please read these instructions carefully before installing and using this product. Keep the instructions handy for future reference. Electrical wiring must only be done by a licensed electrician and a “Certificate of Compliance”...
  • Page 3 EXHAUST LIGHT Air Delivery: Type: 500m E27 LED Motor Power: 48 watts Size: Noise Level: Wattage: 55dB(A) 6 watts Ball Bearing: Brightness: 660Lm Light Colour: 4000k Natural White HEAT SHIPPING Lamp Type: Packaging Size: 475 x 330 x 445mm Infra Red Heat Lamp Lamp Wattage: 3 x 275 watts Gross Weight: Safety Switch:...
  • Page 4 LOCATION The unit must be located and installed in accordance with AS/NZS 3000 and local building codes relating to damp situations. The unit can be installed in any room that requires direct radiant heating and circulated airflow such as bathrooms, ensuites, laundries etc. The unit can be installed in flat ceilings with a minimum height of 2.3 metres.
  • Page 5 WIRING The bathroom heater unit must be wired through either a plug and socket or an all-pole disconnecting switch in accordance with Australian Wiring Rules AS/NZS 3000. Note: This unit is fitted with a thermostat which will operate to automatically switch the fan on if the internal temperature of the unit exceeds 70 degrees.
  • Page 6: Installation

    INSTALLATION STEP 1 Use a pencil and trace around the template (ø380mm). Cut along the line and remove excess material from the ceiling. Draw wires out from the hole and make wiring connection, then rise the main unit towards the hole. STEP 2 STEP 3 Ensure the unit is held securely in...
  • Page 7: Care And Maintanance

    CARE AND MAINTANANCE • Please ensure electrical instruction concerning use switches are out of reach of of the appliance be a person any other person that may be responsible for their safety. bathing or showering. Children should be supervised to ensure that they do not play •...
  • Page 8: Digital Information

    DIGITAL INFORMATION Scan here using a QR Code reader application on your smart phone or visit www.ventair.com.au for the product specifications. 22 Silkwood Rise, Carrum Downs Vic 3201 w w w . v e n t a i r. c o m . a u...