Advertisement
TRI
MEM
SCAN
WATCH
Ten Call Tone Settings
ESC
You can choose between ten different Call Tone Settings to transmit
T
a call alert.
Mode/Power
Call Tone Setting
TRI
MEM
MAX
SCAN
RANGE
WATCH
ESC
Channel Button
T
VibrAlert
and Call Alert
®
Call Tone On/
Vibrate On
R
X
T
Call Tone On/
Vibrate Off
R
BURP Power Saver
X
T
BURP Power Saver
Product Features
MAX
RANGE
To change a call tone setting:
1. Press the Mode/Power button until the
letter "C" and the current call tone number
(01 through 10) is displayed. The current
call tone will sound for three seconds.
2. Press the Channel Up or Channel Down button
to hear the other call tone settings.
3. Choose one of the following:
a. Press the Mode/Power button to enter the
new setting and proceed to other functions.
b. Press Talk or Call button to return to Standby
mode.
c. Do not press any buttons for 12 seconds to return
to Standby mode.
Your MicroTALK
signals by sounding an audible call tone or an
audible tone with VibrAlert
Vox
To change call settings:
1. Press the Mode button until the Call Setting
TW DCS Scan
icon flashes on the display. The current setting
CTCSS Mem
("01" vibrate + ring, "02" ring only) is displayed.
2. Press the Channel Up or Channel Down button to
Vox
change the call setting.
3. Choose one of the following:
TW DCS Scan
a. Press the Mode button to enter the new
CTCSS Mem
setting and proceed to other functions.
b. Press Talk or Call button to return to Standby
mode.
c. Do not press any buttons for 12 seconds to return
to Standby mode.
Using Your Radio
radio can alert you to incoming
®
.
®
•
•
Advertisement
