5.0 Video Synchronisation
The video module has the ability to Auto Detect the DVR or Screen which it is connected.
In case of the video is not transmitted, please perform a reset by following steps according
to your DVR model:
1.
2. For AHD to TVI / TVI to AHD: Cursor on EXPOSURE -> RIGHT RIGHT RIGHT (3 times) then
3. For PAL & NTSC: It is in the OSD menu. ADJUST -> VIDEO OUT
10
For CVBS: Push the OSD button to LEFT for 5 to 10 seconds. The camera automatically
turn OFF and ON. Then you will see the analogue CVBS mode.
ENTER. -> You will see the system in the hidden menu.