Saga D-25MOS User Instructions

Ver. 1.0
You could enter into the programing mode to re-set the function code. To use and program the hotel
safe, please kindly read and follow the instructions carefully:
:

Important Tips

The digital in every position indicate the different function.If you wouldn't like to change the current
setup,you only need to input the same digital in corresponding position or press
into the next screen till quit .
Once you changed their setup ,please press the key
rogramming mode and as long as you enter into the next screen,any changes on previous screen
will be saved automatically.(because you also can enter into the next screen by inputing digitals)
Door position: OPEN (initial code is
＊＊
key in " " ,the hotel safe LED will show
seconds after "PROG" disappeared. Now the operation screen starts to enter into programming mode (input
#
key " " again,you will enter into the next screen)

Program Mode

First Screen
The Options:

(1) CODE APPEARANCE ON THE SCREEN

Press 0 – The presonal code number will not appear on the screen each time when you input the code
(namely is the screen just shows "--------" instead of digit code when you input the code to
open or the door ).
Press 1 -The personal code number will appeared each time.

HOTKEY FUNCTION:

When the parameter you choosed is "0", please press " 9#" , then input the code ,you will find the screen will
display digit code inputing.
When the parameter you choosed is "1", please press " 0#" ,the screen will display
code ,you will find the display just show "------" instead of digit code.
Please note "HOTKEY function
display the digital" by HOTKEY is temporary.
"#"
1234 initial master code is
"PROG ", then input the programming code "7510" in 5
"only take effects to the current operation,that means activate
to save the latest setup when quit the
000000)
Default Parameter
"HIDE
"#"
to enter
",then input the
"Hide or
SAGA