Yamaha YZ250 Owner's Service Manual page 94

REMOVING THE SIDE COVER
1. Remove:
• Bolt (side cover)
• Side cover (left and right) "1"
Draw the side cover backward to remove it be-
cause its claws "a" are inserted in the air filter
case.
REMOVING THE NUMBER PLATE
1. Remove:
• Bolt (number plate)
• Number plate "1"
• The projection "a" is inserted into the band of
the number plate. Pull the band off the projec-
tion before removal.
• Remove the clutch cable "2" from the cable
guide "b" on the number plate.
• The projection "c" on the lower bracket is in-
serted into the number plate. Remove the
number plate by pulling it off the projection.
Downloaded from ManualsNet.com search engine
SEAT, FUEL TANK AND SIDE COVERS
4-3