Sharp LC-12A2E Service Manual page 7

• Caution for handling the LCD panel
1. Work in a clean room. (Humidity: 50% or more)
2. A worker must wear arm bands.
3. Work on a conductive mat.
4. Do not expose the unit to shock such as fall or
vibration.
Diffusion Sheet
Reflection Polarising Sheet
Spacer
1
LCD Display Unit
1
Light Guide Plate
Lamp Unit
(KLMP-0096CEZZ)
ITO Sheet
7
9
Spacer
<<Disassembly of LCD Panel>>
1. Remove the six LCD unit fixing screws.
2. Remove the shield case.
3. Remove the light guide plate holder.
4. Remove the reflection panel.
5. Remove the light guide plate lamp unit.
6. Remove the light guide plate.
7. Remove the lamp unit.
8. Remove the fixing angle.
9. Remove the ITO sheet, diffusion sheet and
reflection polarizing sheet.
Shield Case
Reflection Panel
4
5
6
8
Fixing Angle
7
2
3
1
Light Guide Plate Holder
LC-12A2E