Miele DAS 4920 Operating And Installation Instructions page 42

Installation
Dia. 3: DAS 4920 in a 900 mm wide cabinet or in a 900 mm wide cabinet with side
compartments.
The drawing is not to scale
See diagram 1 for side view
Footnotes for diagrams 1 to 3:
a The front section of the cabinet must be fitted with a base panel to secure the
cooker hood.
b If a partition wall is to be provided in the cabinet, it must be removable.
c Extraction or recirculation with conversion kit DUU 150
d DML 2000 bracket (optional accessory) for fitting a front panel
* In this installation situation, the deflector plate is flush with the front edge of the
housing unit carcase. If you wish to position the cooker hood further forward or
further back, you must adapt the dimensions accordingly (e.g. if you are using a
front panel).
The height of the cabinet and the cut-out dimensions must take into account any
accessories fitted (e.g. silencer, recirculation hood conversion kit)
42