Home >
Print Labels
> Print Labels
Print Labels
To cut off the label, press the Tape Cutter Lever on the upper left corner of the Label Printer.
NOTE
•
To prevent damage to the tape, do not touch or press the Cutter Lever while the message
[Printing... copies] or [Feeding tape... Please wait] appears on the LCD.
•
Do not pull the label when the Label Printer is ejecting it from the Tape Exit Slot. Doing so will cause the
ink ribbon to be discharged with the tape, making the tape unusable.
•
Do not block the Tape Exit Slot during printing. Doing so will cause the tape to jam.
1. After creating your label, press
2. Press a or b to change the number of copies, and then press
•
You can also specify the number of copies using the number keys.
•
If you need only one copy of the label, press
Related Information
•
Print Labels
•
Sequential Printing
•
Mirror Printing
.
without selecting the number of copies.
or OK.
84