Panasonic PV-D4733S-K Service Manual page 7

NR:
Non Repairable Board Ass'y
MGF CHIP:
Metal Glaze Film Chip
C CHIP:
Ceramic Chip
COMPLX CMP:
Complex Component
W FLMPRF:
Wirewound Flameproof
C.B.A.:
Circuit Board Assembly
P.C.B.:
Printed Circuit Board
E.S.D.:
Electrostatically Sensitive Devices
3. When replacing 0
4. Since the UHF/VHF TUNER/TV DEMODULATOR UNIT (Ref. No.
743) has already been pre-adjusted at the factory, do not try to
adjust the UHF/VHF TUNER/TV DEMODULATOR UNIT. The UHF/
VHF TUNER/TV DEMODULATOR UNIT replacement part is
available as a complete assembly unit only.
5. EEP ROM IC (IC6005), MAIN C.B.A. replacement note:
After replacing EEP ROM IC (IC6005) or MAIN C.B.A., be sure to
perform the "PG SHIFTER ADJUSTMENT" in ELECTRICAL
ADJUSTMENT procedures.
6. DVD Unit replacement note:
After replacing the DVD Unit, the DVD Main C.B.A. or EEPROM IC
(IC8002), confirm the Firmware version of DVD. If the version is
different than that indicated on the Firmware Disc, update it using
the Firmware Disc. Refer to "HOW TO UPDATE THE FIRMWARE
OF DVD."
resistor, a wire can be substituted for it.
7