Basic Operations - Brother P-touch PT-D410 Quick Start Manual

Basic Operations

support.brother.com/manuals
Initial Settings
Language Set your language.
Settings
/ [Language]
Select a language
/
Unit Set the unit for various types of
Settings adjustments.
/ [Unit]
[inch] / [mm]
LCD Adjust the LCD contrast.
Contrast
/ [Adjustment]
[LCD Contrast]
[-2] to [+2]
Enter Text
Press to start a new line.
New Line
Maximum number of lines for each
tape width:
0.70" (18 mm): five lines
0.47" (12 mm): three lines
0.35" (9 mm), 0.23" (6 mm): two lines
0.13" (3.5 mm): one line
Block Use this feature to include multiple
lines or font sizes on a single label.
+
Maximum: 5 blocks.
Delete Text Delete text and formatting.
and Format
or
Delete one character at a time
Delete all characters
[Text Only]
Delete all text and formatting.
[Text & Format]
/
Tab Insert a tab.
Maximum length: 4" (100 mm)
Tab Length Set the tab length.
Select a value
Upper-Case Switch between upper-case and
Lower-Case lower-case characters.
Enter Text (cont.)
Label
Length
/
Symbol
Characters
/
/
Accented
/
Characters
/
Frame
Change Font
Change
Font
/
Change
Font Line
By Line
[Tab Length]
/
Auto Fit
Style
Set the label length.
[Auto]: Automatically adjusts the label
length to the length of the text.
[Length]
Set a value /
Inserts symbols, units, and pictures.
Select a category
/ Select a symbol
/
Select text you wish to convert to accented
characters.
Enter characters
Select an accent /
Select a decorative frame to add to your
label.
/ Select a frame
category /
Select a frame /
Change the label font, size, width, style,
and alignment.
/ Select a
font type [Size]
the font height [Width]
Select the font width [Style]
Select the font style
Select the font alignment
/
Change the line font, size, width, style, and
alignment.
+
Move the cursor to the line you
want to change +
[Font] Select a font type
[Size] Select the font height
[Width] Select the font
width [Style] Select the
font style [Align]
the font alignment /
Automatically adjust the text size to fit the
label length.
[Text Size]: Adjust to the length of the label
[Text Width]: Adjust by condensing the
character width by half
/ [Auto Fit Style]
[Text Size] / [Text Width]
/
Set Margins
Set Set the margins before and after an entered
Margins character.
[Small Margin]: Initial margin is approx. 0.9"
(23 mm), and then 0.08" (2 mm) margins are
[Auto] /
inserted before and after the text of each label.
[Large Margin]: Insert an initial margin of
approx. 0.98" (25 mm) is inserted before and
after the text of each label.
[Chain]: Select this setting when printing
multiple labels. The initial margin is approx.
0.9" (23 mm), and then 0.08" (2 mm)
margins are inserted before and after the
text of each label.
[No Cut]: Select this setting when printing
multiple parts or when printing on special tape.
[Special Tape]: Select this setting when
printing on special tape.
Select the margin type
Set Auto Format Layouts
Template Set specific template designs.
/
category
a template
[Font]
Select
[Style]
Block Set Block Layout patterns.
[Align]
Layout
/
Select a font type
[Left] / [Center] / [Right] / [Just]
[Frame]
Print Labels
Select
Preview Use this feature to preview the label before
printing.
Print Start printing.
When printing a single label:
When printing multiple labels:
/
[Cut Option]
/
[Templates]
Select a template
/ Select
/
Select a font type
Select a style /
Enter text /
[Block Layouts] /
Select the tape width
Select a block layout
/ [Font]
[Align]
[On] / [Off] /
Enter text /
/ /
Select a print quantity
/ /