Epson TM-L100 Setup Manual page 13

8
The "Connect with SimpleAP" screen appears. Click the [Search].
The TM printers that can be connected are displayed.
If the TM printer is not displayed, that printer cannot be set to Simple AP mode. Refer to
SimpleAP" on page 30
9
Select the SSID of the TM printer to connect, and click [OK].
10
The following screen appears. Read the details, and then click [Yes].
The PC's Wi-Fi switches to Simple AP mode, the existing Wi-Fi settings are disabled, and
communication is not possible. If you set the Wi-Fi on the printer or turn off the printer, SimpleAP
mode is disabled and the existing Wi-Fi settings are enabled. (This varies according to the PC's
settings.)
to set the TM printer in Simple AP mode.
"Starting
13