Airxcel Suburban Elite SOP-1004A Installation, Operations And User's Manual

Airxcel Suburban Elite SOP-1004A Installation, Operations And User's Manual

Advertisement

Available languages

Available languages

Quick Links

GRIDDLE
FOR YOUR SAFETY
DANGER
If you smell gas:
Shut off gas to the appliance
Extinguish any open flame
Open Lid
If odor continues, keep away from the
appliance and immediately call your gas
supplier or fire department
Never operate this appliance unattended
Never operate this appliance within 25 ft
(7.5 m) to any flammable liquid
If a fire should occur, keep away from the
appliance and immediately call your fire
department. Do not attempt to extinguish any
oil or a grease fire with water.
Failure to follow these instructions could
result in fire or explosion which could cause
property damage, personal injury, or death.
WARNING
Do not store or use gasoline, or other flammable
vapors or liquids in the vicinity of this or any
other appliance.
An LP cylinder not connected for use shall not be
stored in the vicinity of this or any other appliance
PN: 206006
5-21-21
INSTALLATION,
OPERATION and
USER'S MANUAL
ANSI Z21.58-2018 / CSA 1.6-2018
WARNING
This instruction manual contains important
information
necessary
assembly and safe use of the appliance.
Read all safety, installation, operating, and
maintenance instructions thoroughly before
installing or servicing this equipment.
Improper installation, adjustment, alteration,
service or maintenance can cause injury or
property damage.
The installation of this appliance must conform
with state or other codes, or, in the absence of
such codes, with either the National Fuel Gas
Code, ANSI Z223.1 / NFPA 54, or the Standard
for Recreational Vehicles, ANSI A/NFPA 1192,
and CSA Z240 RV Series, Recreational Vehicle
Code, as applicable.
IMPORTANT
INSTALLER /
OWNER: THESE WARNINGS AND
INSTRUCTIONS ARE TO BE LEFT WITH THE END USER
OF THIS APPLIANCE. RETAIN THESE INSTRUCTIONS AND
WARRANTY INFORMATION FOR FUTURE REFERENCE.
ALL TECHNICAL AND WARRANTY QUESTIONS SHOULD
BE DIRECTED TO THE COMPANY LISTED ON THE
WARRANTY OR RATING PLATE WHICH CAME WITH YOUR
APPLIANCE.
MODELS:
SOP-1004A
SOP-1005A
SOP-1010A
SOP-1011A
OUTDOOR USE ONLY
FOR RECREATIONAL VEHICLE USE
CERTIFIED UNDER:
for
the
proper

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Suburban Elite SOP-1004A and is the answer not in the manual?

Questions and answers

Summary of Contents for Airxcel Suburban Elite SOP-1004A

  • Page 1 INSTALLATION, OPERATION and USER’S MANUAL MODELS: SOP-1004A SOP-1005A SOP-1010A SOP-1011A GRIDDLE OUTDOOR USE ONLY FOR RECREATIONAL VEHICLE USE CERTIFIED UNDER: ANSI Z21.58-2018 / CSA 1.6-2018 FOR YOUR SAFETY WARNING DANGER This instruction manual contains important information necessary proper If you smell gas: assembly and safe use of the appliance.
  • Page 2: Table Of Contents

    WARNING TABLE OF CALIFORNIA PROPOSITION 65 CONTENTS WARNING: THIS APPLIANCE COULD EXPOSE YOU TO SUBSTANCES IN FUEL OR FROM FUEL IMPORTANT SAFETY INFORMATION COMBUSTION WHICH ARE KNOWN IN THE GENERAL PRECAUTIONS STATE OF CALIFORNIA TO CAUSE CANCER, PACKAGE CONTENTS BIRTH DEFECTS OR OTHER REPRODUCTIVE ASSEMBLY INSTRUCTIONS HARM.
  • Page 3 INSTALLATION SAFETY PRECAUTIONS 7. When cooking, the appliance must be on a level, stable noncombustible surface in an • Suburban Griddle installation must conform with area clear of combustible material. An asphalt local codes, or in the absence of local codes, surface (blacktop) may not be acceptable for with either the National Fuel Gas Code, ANSI this purpose.
  • Page 4: Package Contents

    CONTENTS Please inspect the contents carefully. This package contains the following parts: PART NO. DESCRIPTION 521257 GRIDDLE PLATE 212219 CONTROL KNOB 212346 GREASE TRAY HARDWARE BAG (BOLTS/ 212352 WASHERS/SPACERS 4 EACH) ASSEMBLY INSTRUCTIONS FOR ALL MODELS See Figure 2. Please read all instructions thoroughly before proceeding. 6.
  • Page 5: Permanent Installation

    MODEL SOP-1004A SOP1005A SOP-1010A SOP-1011A PERMANENTLY INSTALLED SUBURBAN ELITE SERIES INSTALLATION INSTRUCTIONS PLEASE VERIFY FUEL NOZZLE IS HOUSED WITHIN THE BURNER TUBE OPENING AS OUTLINED IN STEP 4 ON PAGE 4. SOP-1004A/SOP-1010A SHOULD ONLY BE USED IN PERMANENT INSTALLATION APPLICATIONS TO CONNECT THE GAS SUPPLY WARNING CAUTION...
  • Page 6: Wall-Mount Installation

    MODEL SOP-1005A SOP-1011A - QUICK-CONNECT (QC) SUBURBAN ELITE SERIES INSTALLATION INSTRUCTIONS NOTE: QC MODELS CAN BE USED IN BOTH PERMANENT INSTALLATION APPLICATIONS AS WELL AS TEMPORARY APPLICATIONS USING WALL MOUNT KIT, 4003A (PURCHASED SEPARARATELY) CAUTION Connect to propane using the existing RV low pressure gas system hose by inserting the quick-disconnect BEFORE YOU BEGIN INSTALLATION female into the male quick-disconnect fitting on the...
  • Page 7: Operating Instructions

    BURNER FLAME CHECK OPERATING Prior to lighting the burner, remove the griddle plate in order to visually inspect the flame. Light burner and INSTRUCTIONS rotate knob from high to low – you should see a smaller flame in the low position than you see in the LIGHTING THE GRIDDLE high position.
  • Page 8: Care And General Maintenance

    VALVE CHECK CARE and GENERAL Important: To check valve, first push in knob and release, knob should spring back. If knob does not MAINTENANCE spring back, replace valve assembly before using the griddle. Turn knob to low position then turn back to WARNING OFF position.
  • Page 9: Food Safety

    STORING YOUR GRIDDLE DANGER CLEANING THE BURNER ASSEMBLY Follow these instructions to clean the burner. 1. Turn gas OFF at the control knob. Do not put griddle in storage or travel mode 2. Ensure all components have cooled immediately after use. Allow griddle to cool to touch before moving or storing.
  • Page 10: Troubleshooting Guide

    Clean injection and gas hose hose hissing or roaring noise Burner could be damaged Call Suburban Customer Service Contact Suburban - A Division of Airxcel Customer Service Department at 423.775.2131 EXT: 7101 for help troubleshooting, assembly questions, operation problems, and replacement parts (if required).
  • Page 11: Product Specifications

    PRODUCT SPECIFICATIONS MODELS: SOP-1004A/1005A/1010A/1011A SOP-1005A SOP-1011A - QUICK CONNECT SOP-1004A SOP-1010A - PERMANENT INSTALLATION BURNER INPUT 19,000 BTU/h BURNER INPUT 19,000 BTU/h RATE RATE MAX: 13 inches W.C. (Water Column) INLET GAS MAX: 13 inches W.C. (Water Column) INLET GAS PRESSURE PRESSURE UNIT WEIGHT...
  • Page 12: Ratings Label

    The unit ratings label can be located inside the burner box. To view the ratings label, remove the Griddle Plate. MODEL SOP-1004A RATING LABEL MODEL SOP-1005A RATING LABEL AIRXCEL, INC. - SUBURBAN DIVISION DAYTON, TENNESSEE 37321 AIRXCEL, INC. - SUBURBAN DIVISION DAYTON, TENNESSEE 37321 Model Number/Numéro de modèle: SOP1004A...
  • Page 13: Warranty

    CENTERS OR OTHER PERSON IS AUTHORIZED TO ASSUME PROOF OF PURCHASE. Suburban - A Division of Airxcel; hereafter FOR SUBURBAN ANY ADDITIONAL, DIFFERENT OR OTHER referred to as Suburban, does not use warranty registration therefore,...
  • Page 14 échangé seront garantis seulement pendant la portion expirée indépendantes du contrôle de Airxcel, Inc. - une division d’Airxcel. de la garantie d’origine. Avant de faire effectuer les réparations au titre DE TOUT DOMMAGE SPÉCIAL, INDIRECT OU ACCESSOIRE...
  • Page 15 L’étiquette signalétique de l’appareil se trouve à l’intérieur du boîtier du brûleur. Pour consulter l’étiquette signalétique, retirer la plaque de la surface de cuisson. MODÈLE SOP-1004A ÉTIQUETTE DE NOTATION MODÈLE SOP-1005A ÉTIQUETTE DE NOTATION AIRXCEL, INC. - SUBURBAN DIVISION DAYTON, TENNESSEE 37321 AIRXCEL, INC. - SUBURBAN DIVISION DAYTON, TENNESSEE 37321 Model Number/Numéro de modèle: SOP1004A...
  • Page 16 SPÉCIFICATIONS DES MODÈLES DU PRODUIT : SOP-1004A/1005A/1010A/1011A SOP-1005A/1011A – CONNEXION RAPIDE SOP-1004A/1010A – INSTALLATION PERMANENTE DÉBIT D’ENTRÉE DU BRÛLEUR DÉBIT D’ENTRÉE DU BRÛLEUR 19 000 BTU/h 19 000 BTU/h PRESSION DE L’ENTRÉE DE GAZ Colonne d’eau de 13 po maximum PRESSION DE L’ENTRÉE DE GAZ Colonne d’eau de 13 po maximum POIDS DE L’APPAREIL POIDS DE L’APPAREIL...
  • Page 17 Communiquer avec le service à la clientèle de Le brûleur pourrait être endommagé. Suburban le Service clientèle de Suburban -Une division d’Airxcel au (423) 775-2131 EXT : 7101 Contactez pour le dépannage, les questions sur l’assemblage, les problèmes d’exploitation et les pièces de rechange (au besoin).
  • Page 18 RANGEMENT DE LA SURFACE DE CUISSON DANGER SÉCURITÉ ALIMENTAIRE Ne pas placer la surface de cuisson en mode de rangement ou de voyage immédiatement après l’utilisation. Laisser refroidir la surface de cuisson communiquez avec le service à la clientèle de Suburban avant de la déplacer ou de la ranger.
  • Page 19 VÉRIFICATION DE LA VANNE Important : pour vérifier la vanne, appuyez d’abord sur le bouton SOINS et ENTRETIEN et relâchez-le; le bouton devrait rebondir. Si le bouton ne rebondit GÉNÉRAL pas, remplacer l’ensemble de la vanne avant d’utiliser la surface de cuisson.
  • Page 20 et tourner le bouton de « élevée » à « basse »; on devrait voir une plus petite flamme en position basse qu’en position élevée.Voir la INSTRUCTIONS figure 12. Toujours vérifier la flamme avant chaque utilisation. Si D’UTILISATION on ne voit qu’une flamme basse, consulter la rubrique Le brûleur a une flamme basse, peu importe la position du bouton dans la section de Dépannage.
  • Page 21 MODÈLE SOP-1005A/1011A – D’INSTALLATION DE LA SURFACE DE CUISSON DE LA SÉRIE ELITE DE SUBURBAN À DÉGAGEMENT RAPIDE REMARQUE : LE SOP-1005A/1011A PEUT ÊTRE UTILISÉ DANS LES APPLICATIONS D’INSTALLATION PERMANENTES, 4003A (ACHETÉ SÉPARÉMENT) ATTENTION Branchez le SOP-1005A ou 1011A au propane en utilisant le tuyau du système de gaz basse pression du véhicule récréatif existant AVANT DE COMMENCER L’INSTALLATION en insérant le raccord rapide femelle dans le raccord rapide mâle à...
  • Page 22 MODÈLE SOP-1004A/1005A/1010A/1011A – D’INSTALLATION DE LA SURFACE DE CUISSON DE LA SÉRIE ELITE DE SUBURBAN À INSTALLATION PERMANENTE VÉRIFIEZ ATTENTIVEMENT SI LA BUSE DE CARBURANT EST LOGÉE À L’INTÉRIEUR DE L’OUVERTURE DU TUBE DU BRÛLEUR, COMME INDIQUÉ À L’ÉTAPE 4 DE LA PAGE 4. SOP-1004A/1010A NE DOIT ÊTRE UTILISÉ QUE DANS LES APPLICATIONS D’INSTALLATION PERMANENTE POUR BRANCHER L’ALIMENTATION AVERTISSEMENT...
  • Page 23 INSTRUCTIONS D’ASSEMBLAGE POUR TOUS LES MODÈLES S’il vous plaît lire toutes les instructions à fond avant de procéder. Trouvez une grande zone propre dans laquelle assembler votre griddle suburban elite series. REMARQUE : Assurez- vous que toute la protection en plastique et l’emballage sont enlevés avant l’assemblage.
  • Page 24 AVERTISSEMENT PRÉCAUTIONS DE SÉCURITÉ LORS DE L’INSTALLATION • Cet appareil doit être utilisé à l’extérieur seulement et • L’inspection de la surface de cuisson Suburban doit ne doit pas être utilisé dans un bâtiment, un garage respecter les codes locaux ou, en l’absence de codes ou tout autre endroit enfermé.
  • Page 25 AVERTISSEMENT TABLE DES AVERTISSEMENT DE LA PROPOSITION 65 DE MATIÈRES LA CALIFORNIE : CET APPAREIL POURRAIT VOUS EXPOSER À DES SUBSTANCES DANS LE CARBURANT OU À LA RENSEINEMENTS IMPORTANTS RELATIFS À LA SÉCURITÉ COMBUSTION DE CARBURANT QUI SONT CONNUES PRÉCAUTIONS GÉNÉRALES DANS L’ÉTAT DE LA CALIFORNIE POUR CAUSER CONTENU DE L’EMBALLAGE LE CANCER, DES ANOMALIES CONGÉNITALES OU...
  • Page 26 MANUEL D’INSTALLATION, DE FONCTIONNEMENT et D’UTILISATION MODÈLES : SOP-1004A SOP-1005A SOP-1010A SOP-1011A SURFACE DE CUISSON UTILISATION EXTÉRIEURE SEULEMENT POUR VÉHICULES DE PLAISANCE HOMOLOGUÉ : ANSI Z21.58-2018 / CSA 1.6-2018 POUR VOTRE SÉCURITÉ AVERTISSEMENT DANGER Ce manuel d’instructions contient des informations importantes qui sont nécessaires pour l’assemblage Si vous sentez du gaz : approprié...

Table of Contents