GRIDDLE
FOR YOUR SAFETY
DANGER
If you smell gas:
•
Shut off gas to the appliance
•
Extinguish any open flame
•
Open Lid
•
If odor continues, keep away from the
appliance and immediately call your gas
supplier or fire department
•
Never operate this appliance unattended
•
Never operate this appliance within 25 ft (7.5
m) to any flammable liquid
•
If a fire should occur, keep away from the
appliance and immediately call your fire
department. Do not attempt to extinguish
any oil or a grease fire with water.
Failure to follow these instructions could result
in fire or explosion which could cause property
damage, personal injury, or death.
WARNING
Do not store or use gasoline, or other flammable
vapors or liquids in the vicinity of this or any
other appliance.
PN: 205514
08-03-2019
INSTALLATION,
OPERATION and
USER'S MANUAL
WARNING
This instruction manual contains important
information necessary for the proper assembly
and safe use of the appliance.
Read all safety,
maintenance instructions thoroughly before
installing or servicing this equipment.
Improper installation, adjustment, alteration,
service or maintenance can cause injury or
property damage.
The installation of this appliance must conform
with state or other codes, or, in the absence of
such codes, with either the National Fuel Gas
Code, ANSI Z223.1 / NFPA 54, or the Standard for
Recreational Vehicles, ANSI A/NFPA 1192, and
CSA Z240 RV Series, Recreational Vehicle Code,
as applicable.
IMPORTANT
INSTALLER
/
OWNER:
INSTRUCTIONS ARE TO BE LEFT WITH THE END USER
OF THIS APPLIANCE. RETAIN THESE INSTRUCTIONS AND
WARRANTY INFORMATION FOR FUTURE REFERENCE.
ALL TECHNICAL AND WARRANTY QUESTIONS SHOULD BE
DIRECTED TO THE COMPANY LISTED ON THE WARRANTY
OR RATING PLATE WHICH CAME WITH YOUR APPLIANCE.
MODELS:
SOP-1002A
SOP-1003A
OUTDOOR USE ONLY
FOR RECREATIONAL
VEHICLE USE
CERTIFIED UNDER:
ANSI Z21.89-2017 / CSA 1.18-2017
installation, operating, and
THESE
WARNINGS AND
Need help?
Do you have a question about the Suburban Elite Series and is the answer not in the manual?
Questions and answers
How do I light this thing
To light the Airxcel Series:
1. Make sure the control knob is in the OFF position.
2. Push the control knob in and turn it counter-clockwise to the “Light” position.
3. If ignition does not occur in 5 seconds, turn the control knob to OFF, wait 5 minutes, and try again.
For match lighting:
1. Ensure the control knob is OFF.
2. Remove the griddle top.
3. Light an 11” long match and place it near the ignition electrode on the right or left side of the burner.
4. Push the control knob in and turn it counter-clockwise to HIGH.
5. Confirm the burner lights and stays lit.
This answer is automatically generated