Advertisement
Laser operation time ............. In STOP mode, main unit STOP+FWD
-SKIP+ remote controller [5]
Spindle motor operation time ..... In STOP mode, main unit STOP+
FWD-SKIP+ remote controller [6]
2. How to utilize
Reference information in fault diagnosis of laser or spindle motor
system
Review of faulty point in repeated repair
8.5.2. Servo process display
1. Operation/display
While the player is in STOP mode, perform the specified key
operation to display the servo process number on FL.
When the display does not change from the error indication, press
Open/Close key to show the servo process number.
Key operation: In STOP mode, main unit PAUSE+FWD- SKIP+
remote controller [7]
8.6. Servo Process Flow
24
Advertisement
