Operation - Broan PMA400SS Installation, Use & Care Manual

OPERATION

A: Blower Speed Selection Switch:
This 3-way rocker switch controls the blower speed .
Upper position: High speed .
Lower position: Low speed .
B: ON/OFF Blower Switch:
This rocker switch turns the blower ON and OFF .
Left position: OFF .
Right position: ON .
C: ON/OFF Light Switch:
This rocker switch turns the LED lights ON and OFF .
Left position: OFF .
Right position: ON .
HEAT SENTRY™
Your unit is equipped with a HEAT SENTRY™ thermostat .
This thermostat is a device that will turn on or speed up the blower
if it senses excessive heat above the cooking surface .
1) If blower is OFF - it turns blower ON to HIGH speed .
2) If blower is ON at a lower speed setting - it turns blower
up to HIGH speed .
When the temperature level drops to normal, the blower will return
to its original setting .
WARNING
!
The HEAT SENTRY thermostat can start the blower
even if the hood is turned OFF . When this occurs, it
is impossible to turn the blower OFF with its switch .
If you must stop the blower, set the main power
switch (located behind the filters, on inner side of
the unit faceplate) in OFF position (if it is possible to
do so safely) . See inset in FIG . 33 .
A
HC0108
HD1361
B
C
FIG. 33
17