Table of Contents
Advertisement
Save these instructions. For your safety, read, understand, and follow the information provided with and on this jack.
The owner and operator of this equipment shall have an understanding of this jack and safe operating procedures before
attempting to use. The owner and operator shall be aware that use and repair of this product may require special skills
and knowledge. Instructions and safety information shall be conveyed in the operator's native language before use of
this jack is authorized. If any doubt exists as to the safe and proper use of this jack, remove from service immediately.
Inspect before each use. Do not use if broken, bent, cracked or damaged parts are noted. Any jack that appears
damaged in any way, or operates abnormally shall be removed from service immediately. If the jack has been or
suspected to have been subjected to a shock load (a load dropped suddenly, unexpectedly upon it), immediately
discontinue use until jack has been checked by an KTI authorized service center. It is recommended that an annual
inspection be done by qualified personnel. Labels and Owner's Manuals are available from manufacturer (see Replacement
Parts section).
PRODUCT DESCRIPTION
KTI Transmission Jacks are designed to be used as an aid in the removal and installation of vehicle component parts
and assemblies, specifically transmissions. Model Nos. KTI-63503, KTI-63504 and KTI-63505 are for use under an
overhead lift or in a garage pit. The air actuated function is an added feature of Model No. KTI-63504. Model No. KTI-
63511 is for use under portable lift equipment, where vehicle must be supported by appropriately rated jack stands. With
Model KTI-63504, ensure that your air source can dedicate 7.8 CFM @ 90 - 175 PSI to each jack operated. To ensure
dependable, trouble free operation an air dryer and oiler is recommended.
SPECIFICATIONS
Model
Capacity
KTI-63503
1000 Lbs
KTI-63504
1000 Lbs
KTI-63505
2000 Lbs
KTI-63511
2000 Lbs
Product appearance may differ slightly from this publication due to improvements in manufacturing, design
and materials. However, performance characteristics will not be adversely affected.
Base Size ( L x W )
33-1/8" x 35-1/2"
34-1/8" x 36-1/8"
42-1/8" x 39-1/2"
39-3/8" x 19-1/8"
3
Max. Height
Min. Height
37-7/8"
37-7/8"
48-5/8"
7-7/8"
77-5/8"
77-5/8"
77-3/8"
33-1/2"
Advertisement
Table of Contents
