ZyXEL Communications NBG7510 User Manual page 96

Figure 52 Network Setting > Broadband > Add or Edit New WAN Interface (Ethernet)
The following table describes the labels in this screen.
Table 27 Network Setting > Broadband > Add or Edit New WAN Interface (Routing Mode)
LABEL DESCRIPTION
General Click this switch to enable or disable the interface. When the switch goes to the right
function is enabled. Otherwise, it is not.
Name Specify a descriptive name for this connection.
This field is read-only if you are editing the WAN interface.
Type This field shows the types of available connections.
This field is read-only if you are editing the WAN interface.
Mode Select Routing if your ISP give you one IP address only and you want multiple computers to share
an Internet account.
Encapsulation Select the method of encapsulation used by your ISP from the drop-down list box. This option is
available only when you select Routing in the Mode field.
When you select Ethernet, the choices are PPPoE and IPoE.
Chapter 8 Broadband
NBG7510 User's Guide
96
, the