Channel Status - ZyXEL Communications NBG7510 User Manual

9.8 Channel Status

Use this screen to scan for wireless LAN channel noises and view the results. Click Scan to start, and then
view the results in the Channel Scan Result section. The value on each channel number indicates the
number of Access Points (AP) using that channel. The Auto-channel-selection algorithm does not always
directly follow the AP count; other factors about the channels are also considered. Click Network Setting
> Wireless > Channel Status. The screen appears as shown. Click Scan to scan wireless LAN channels.
You can view the results in Channel Status screen.
Note: If the current channel is a DFS channel, the warning 'Channel scan process is denied
because current channel is a DFS channel (Channel: 52 – 140). If you want to run
channel scan, please select a non-DFS channel and try again.' appears..
Note: The blue value is the AP count. It's the number of access points (AP) in the wireless LAN
channel.
Note: The AP count may not be a real-time value.
Figure 63 Network Setting > Wireless > Channel Status
Chapter 9 Wireless
NBG7510 User's Guide
118