Samsung HW-N400 User Manual page 18

Press the p button to pause a music file temporarily.

When you press the button again, the music file plays.
Play / Pause

PAIR
Up/Down/
SOUND
MODE
PAIR
Left/Right
Press Up/Down/Left/Right on the button to select or set functions.
SOUND
MODE
• Repeat
• Music Skip
VOL BASS
VOL BASS
• Anynet+ / Auto Power Link
You can select from TREBLE, AUDIO SYNC, REAR LEVEL, or REAR SPEAKER ON/OFF.

• To adjust the TREBLE volume, select Sound Control TREBLE, and then use the
Sound Control
• If the video and audio between the TV and your Soundbar are not synchronised, select
• If surround speakers (not supplied) are connected, select REAR LEVEL and use the Up/
• AUDIO SYNC is only supported in some functions.
SOUND
MODE
Press the indicated areas to select Up/Down/Left/Right.
To use the Repeat function in "USB" mode, press the Up button.
Press the Right button to select the next music file. Press the Left button to select the
previous music file.
You can turn Anynet+ and Auto Power Link on or off.
Anynet+ and Auto Power Link are controlled by the Right and Left buttons
respectively.
– Anynet+ : If the Soundbar is connected to a Samsung TV through an HDMI cable,
you can control your Soundbar with a Samsung TV remote control.
Press and hold the Right button for 5 seconds to toggle Anynet+ ON and OFF.
– Auto Power Link : If the Soundbar is connected to your TV through a digital optical
cable, the Soundbar can automatically turn on when you turn on your TV. Press
and hold the Left button for 5 seconds to toggle Auto Power Link ON and OFF.
– Anynet+ / Auto Power Link are set to ON by default.
Up/Down buttons to adjust the volume within the -6 to +6 range.
AUDIO SYNC in Sound Settings, and then set audio delay between 0~300 milliseconds
by using the Up/Down buttons. (Except "USB" mode)
Down buttons to adjust the volume within the -6 to +6 range.
The REAR SPEAKER function can be turned ON/OFF by using the Up/Down buttons.
PAIR
ENG - 14