Tracking Center Mode (Tracking Fix At Center); How To Reset All Vcr Memory Functions; Connection Note - Panasonic PV-V4525S Service Manual

PV-V4525S / PV-V4535S-K / PV-455S-K
4.8. TRACKING CENTER MODE
(TRACKING FIX AT CENTER)
Insert the Cassette tape. Set the unit into Service Mode. Press
CH UP button and CH DOWN button on VCR together in Play
back mode. "TRACKING CENTER" will be displayed on the TV
monitor.
In this mode, the tracking is fixed at center. (Auto tracking and
manual tracking functions are not operational.)
To release from this mode, press CH UP button and CH
DOWN button on VCR together again.
Fig. 7-2
Fig. 8-1
4.9. HOW TO RESET ALL VCR
MEMORY FUNCTIONS
To reset (clear) the select language, channel auto set and set
clock functions to their initial power on condition (power on, no
cassette inserted), hold down the PLAY and CH DOWN
buttons on the VCR together for more than 5 seconds.
Power will shut off.
4.10. F.F.C. CONNECTION NOTE
Be careful with the direction of F.F.C.s to connectors as shown.
Note:
1. Insert the F.F.C. so that it is parallel to the connector.
2. After inserting the F.F.C., check that the F.F.C. does not
incline.
10
Fig. 9-1
Fig. 10-1