Panasonic PV-V4535S-K Operating Instructions Manual

Location of Controls
Remote Control Buttons
EJECT
(Ejects tape)
POWER
(Turns VCR off/on)
NUMBER Keys
(Selects channel directly)
INPUT
(For LINE or channel)
ADD/DELETE
(Adds or deletes a channel)
PAUSE/SLOW
(Displays still, frame by frame,
or slow motion picture)
ACTION
(Displays menu)
PROGRAM
(Displays Timer Program screen)
SAP/Hi-Fi
(Selects audio mode for play
or record)
VOLUME +/-
(Adjusts TV volume)
RECORD
(Records a program, etc.)
SPEED
(Changes tape speed)
COMMERCIAL SKIP/
ZERO SEARCH
(Starts COMMERCIAL SKIP/
Zero Search)
Remote Control
EJECT button:
Multi Function Display (FRONT DISPLAY)
Power Indicator
Lights up when power is on.
Timer Indicator
Lights up when the VCR is set for a Timer
Recording, or when One Touch Recording
(OTR) is used.
Flashes when a Timer Recording is set, but
a tape has not been inserted into the VCR.
Montréal: 3075 Louis A. Amos, Lachine, Québec H8T 1C4 (514) 633-8684
Toronto: 5770 Ambler Drive, Mississauga, Ontario L4W 2T3 (905) 624-8447
Calgary: 6835-8 th Street N.E., Calgary, Alberta T2E 7H7 (403) 295-3955
Vancouver: 12111 Riverside Way, Richmond, BC V6W 1K8 (604) 278-4211
Panasonic Canada Inc.
5770 Ambler Drive, K
Mississauga, Ontario L4W 2T3
(905) 624-5010
www.panasonic.ca
Printed in Indonesia
LSQT0926 A
S1204-0
- 8 -
V4535S-K (E) Basic-1 (041208).p65 1
LSQT0926A (Basic Operations) - Front
Location of Controls / Reset All VCR Memory Functions
Front View of the VCR
Cassette Compartment
VCR (mode)
(Enables VCR functions)
Remote
Sensor
TV (mode)
(Enables TV functions)
VCR/TV
POWER
(For TV or VCR mode)
COUNTER RESET
(Resets counter to zero)
TAPE POSITION/STATUS
Video
(Locates tape position/tape status)
Input
DISPLAY Connector
(Displays VCR status)
PLAY (Plays a tape)/
Audio Input CHANNEL
/
FAST FORWARD/SEARCH
Connector
TRACKING/ V-LOCK
(Fast forwards tape/ forward
(L/R)
visual search)
REWIND/SEARCH Multi Function Display
(Rewinds tape/ reverse visual (Front Display)
search)
STOP
(Stops tape)
Remote keys
PLAY, STOP, REW, and FF
function as
operation keys when menus
are displayed. Rear View of the VCR
CHANNEL /
AC Power Plug
TRACKING/ V-LOCK
While plugged into an AC outlet, the VCR consumes 0.9 W
(Selects channel/ reduces
of electrical power in off condition.
picture noise during Play and
Slow mode)
Video Input Video Output
SEARCH/ ENTER
Connector Connector
(Set search system /
Tunes TV channel)
Press to eject tape. EJECT is not available during recording.
• •
Audio Input Audio Output
Connector (L/R) Connector (L/R)
Reset All VCR Memory Functions
Returns to factory setting. Use if relocating VCR, or if Initial Setup needs to be redone.
• Make sure a tape is not inserted in the VCR.
Clock/ Status/ Channel/ Speed Display
Displays current time. Briefly displays VCR
status when you press a function button,
channel number or "L1" or "L2" when you select
channel or line input, and recording speed when
you press SPEED.
1 2
Note to CABLE system installer
This reminder is provided to call the CABLE system installer's attention to Article 820-40 of the NEC
in USA (and to the Canadian Electrical Code in Canada) that provides guidelines for proper
grounding and, in particular, specifies that the cable ground shall be connected to the grounding
system of the building, as close to the point of cable entry as practical.
- 9 -
Reset Language, Channels, Clock, VCR's Output Channel
MENU Press ACTION*
SET UP VCR
SET UP CLOCK to display MENU.
SET UP CHANNEL
IDIOMA/LANGUE : ENGLISH
VCR'S OUTPUT CH: 3
SELECT : SET:
EXIT : ACTION
STOP/EJECT
Language Channels Clock
1) Press to select
1) Press to select 1) Press to select
language item. "SET UP CHANNEL," "SET CLOCK," and
and press . press .
MENU
SET UP VCR
SET UP CLOCK
MENU MENU
SET UP CHANNEL SET UP VCR SET UP VCR
IDIOMA/LANGUE : ENGLISH SET UP CLOCK SET UP CLOCK
VCR'S OUTPUT CH: 3
SET UP CHANNEL SET UP CHANNEL
IDIOMA/LANGUE : ENGLISH IDIOMA/LANGUE : ENGLISH
FAST VCR'S OUTPUT CH: 3 VCR'S OUTPUT CH: 3
SELECT : SET :
EXIT : ACTION
FORWARD/ SELECT : SET:
SELECT : SET:
2) Press repeatedly EXIT : ACTION EXIT : ACTION
SEARCH
to change language 2) Press to select 2) Press to select
"ANTENNA," then "MANUAL," and press
item as shown below.
RECORD REWIND/
press to set . (For Auto Clock Set,
SEARCH MENU
your antenna system select "AUTO CLOCK
SET UP VCR
SET UP CLOCK
("TV" or "CABLE.") SET.")
SET UP CHANNEL
IDIOMA/LANGUE : ENGLISH
PLAY VCR'S OUTPUT CH: 3
SET UP CHANNEL SET CLOCK
SELECT : SET : ANTENNA : CABLE
EXIT : ACTION AUTO SET AUTO CLOCK SET
WEAK S I GNAL D I SPLAY : OFF MANUAL
T I ME ZONE ADJUST : 0
For English
SELECT : SET : SELECT : SET :
MENU EXIT : ACT I ON EXIT : ACT I ON
PREPARAR VCR
FIJAR RELOJ
3) Press to select ("TIME ZONE ADJUST"
FIJAR CANAL
LANGUE/LANGUAGE:ESPAñOL
"AUTO SET," then appears only when
SALIDA DE VCR CANAL : 3
press . auto clock is set.)
ELEGIR : FIJAR :
SALIR : ACTION • If you use Cable
Box, set it to the
For Spanish
PBS channel in your
MENU time zone.
REGLAGE MAGNETOSCOPE
REGLAGE HORLOGE
REGLAGE CANAL
LANGUAGE/IDIOMA:FRANçAIS
CA SORTIE : 3
3) Press and
CH AUTO SET PROCEEDING
VHF/UHF Antenna
SEL. : REGLER: to select and set
QUITTER : ACTION
Input Terminal
the date, time, and
For French
CANCEL : STOP DST (Daylight
Saving Time).
3) Press ACTION to exit.
• After Channel Auto
Set is finished, Auto 4) Press ACTION to
Clock Set will be start the Clock and
performed. exit this mode.
VHF/UHF Antenna
Output Terminal
VCR's Output Channel
Add or Delete a Channel
1) Press to select
To add channel:
"VCR'S OUTPUT CH."
Select channel with NUMBER keys and
MENU
SET UP VCR press ADD/DLT.
SET UP CLOCK
SET UP CHANNEL
IDIOMA/LANGUE : ENGLISH
VCR'S OUTPUT CH: 3
SELECT : SET:
EXIT : ACTION
2) Press .
To delete channel:
IF YOU PRESS ACTION
KEY, VCR ' S OUTPUT CH
Select channel with CH
SWITCHES TO CH 4.
keys and press ADD/DLT.
3) Press ACTION.
1
Turn VCR Power on.
PLEASE TUNE YOUR TV TO
2 Press and hold both PLAY and CH 4.
CHANNEL on the VCR for more than 5
seconds.
DST (Daylight Saving Time)
• The power shuts off.
After 3 seconds
VCR auto adjusts clock for DST.
Spring (First Sunday in April)
MENU
3 Perform "Initial Setup (Ready to Play)" on
SET UP VCR DST:ON ➛ Sets clock ahead one hour.
SET UP CLOCK
page 4. SET UP CHANNEL
IDIOMA/LANGUE : ENGLISH Autumn (Last Sunday in October)
VCR'S OUTPUT CH: 4
DST:ON ➛ Turns clock back one hour.
SELECT : SET: • If your area does not observe Daylight
EXIT : ACTION
Saving Time, select DST:OFF.
• To Make Corrections, • Keep these time changes in mind when
repeat steps 1) ~ 3). programming VCR for timer recordings.
*Important: If a remote control button does not work when pressed,
press the VCR button on the remote and try the button again.
- 10 - - 11 -
2004/12/13, 9:59
Limited Warranty
Panasonic Canada Inc.
5770 Ambler Drive, Mississauga, Ontario L4W 2T3
PANASONIC PRODUCT – LIMITED WARRANTY
Time Zone
Panasonic Canada Inc. warrants this product to be free from defects in material
Adjust
and workmanship and agrees to remedy any such defect for a period as stated
(Only when Auto
below from the date of original purchase.
Clock is set.)
1) Press to select
VHS Video Cassette Recorder – One (1) year, parts and labour
"SET CLOCK," and
press .
LIMITATIONS AND EXCLUSIONS
MENU
SET UP VCR This warranty does not apply to products purchased outside Canada or to any
SET UP CLOCK
SET UP CHANNEL
product which has been improperly installed, subjected to usage for which the
IDIOMA/LANGUE : ENGLISH
VCR'S OUTPUT CH: 3
product was not designed, misused or abused, damaged during shipping, or
SELECT : SET:
which has been altered or repaired in any way that affects the reliability or
EXIT : ACTION
detracts from the performance, nor does it cover any product which is used
2) Press to select
commercially. Dry cell batteries are also excluded from coverage under this
"TIME ZONE
ADJUST," warranty.
SET CLOCK This warranty is extended to the original end user purchaser only.
A purchase receipt or other proof of date of original purchase is required before
AUTO CLOCK SET
MANUAL
T I ME ZONE ADJUST : 0 warranty service is performed.
SELECT : SET : THIS EXPRESS, LIMITED WARRANTY IS IN LIEU OF ALL OTHER
EXIT : ACT I ON
WARRANTIES, EXPRESS OR IMPLIED, INCLUDING ANY IMPLIED
and press to
subtract or add WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
hour(s) as necessary.
PURPOSE.
3) Press ACTION.
IN NO EVENT WILL PANASONIC CANADA INC. BE LIABLE FOR ANY
• "TIME ZONE
SPECIAL, INDIRECT OR CONSEQUENTIAL DAMAGES.
ADJUST" returns to
In certain instances, some jurisdictions do not allow the exclusion or limitation of
"0" if clock is set
manually. incidental or consequential damages, or the exclusion of implied warranties, so
the above limitations and exclusions may not be applicable.
WARRANTY SERVICE
For product operation and information assistance, please contact your Dealer or our
Customer Care Centre at:
Telephone #: Fax #: Web:
(905) 624-5505 (905) 238-2360 www.panasonic.ca
For product repairs, please contact one of the following:
• Your Dealer who will inform you of an authorized Servicentre nearest you.
• Our Customer Care Centre at (905) 624-5505 or www.panasonic.ca
• A Panasonic Factory Servicentre listed below:
Richmond, British Calgary, Alberta Mississauga, Ontario
Columbia
Panasonic Canada Inc. Panasonic Canada Inc.
CHANNEL 08 ADDED
Panasonic Canada Inc. 6835-8 th St. N. E. 5770 Ambler Dr.
12111 Riverside Way Calgary, AB T2E 7H7 Mississauga, ON L4W 2T3
Richmond, BC V6W 1K8 Tel: (403) 295-3955 Tel: (905) 624-8447
Tel: (604) 278-4211 Fax: (403) 274-5493 Fax: (905) 238-2418
/ or NUMBER Fax: (604) 278-5627
Lachine, Québec
CHANNEL 08 DELE TED
Panasonic Canada Inc.
3075, rue Louis A. Amos
Lachine, QC H8T 1C4
Tel: (514) 633-8684
Fax: (514) 633-8020
IF YOU SHIP THE PRODUCT TO A SERVICENTRE
Carefully pack and send prepaid, adequately insured and preferably in the original
carton. Include details of the defect claimed, and proof of date of original purchase.
- 12 -
Video Cassette Recorder
Operating Instructions
(Basic Operations)
For advanced operations, see the separate
"Advanced Operations" instruction book.
PV-V4535S-K
Model No.
Table of Contents
Important Safeguards and Precautions ........................... 2
Before Using ................................................................... 3
Connections and Initial Setup (Ready to Play) ................ 4
Playback / Record on a Tape .......................................... 5
Timer Recording ........................................................... 6, 7
Location of Controls ................................................... 9, 10
Reset All VCR Memory Functions ................................. 10
Reset Language, Channels, Clock,
VCR's Output Channel ................................................. 11
Limited Warranty ........................................................... 12
E S
As an NERGY TAR ® Participant, Panasonic has determined
that this product or product model meets the E NERGY S TAR ®
guidelines for energy efficiency.
Please read these instructions carefully before attempting to
connect, operate or adjust this product. Please save this manual.
LSQT0926 A
For assistance, please call : 1-800-561-5505 or visit us at www.panasonic.ca