Advertisement
4
Problems caused by faulty connection will invalidate the warranty.
1.
INPUT 1. As a standard feature the amplifier has one balanced XLR input, so as to make it a
perfect match with the XLR output of a source, e.g. a CD player.
INPUTS 2 – 6. Suitable for all sources with RCA-cinch connectors as well as having an output
2.
at line level. E.g. CD player, SACD player, D/A converter, Tuner, CD recorder, HDHT PC and
Media Player.
3.
TAPE-OUT. To be connected to the input of a CD Recorder, HDHT PC or Media Player.
4.
PRE-OUT. Outputs of the Pre-Amplifier, both RCA- cinch and XLR. To be connected to RCA-
cinch or XLR input(s) of the Power Amplifier(s).
5.
DC and RC control. DC control can only be used with other Van Medevoort Power Amplifier(s).
One can only switch into STANDBY or ON, via the Remote Control.
RC control. The RC output can only be connected to the RC input of e.g. a tuner. Then the
tuner can be operated with the Van Medevoort Remote Control.
6.
IEC-USA Power Chassis Connector. To be connected with the proper wall socket, which must
be earthed or grounded. Every Van Medevoort product is optimized for your country's electrical
standards. e.g. 230V-50Hz or 115V-60Hz. This cannot be changed. Please check that your
product is set to the correct voltage setting BEFORE connecting to an AC power outlet.
5
vM CA470 STEREO CONTROL AMPLIFIER
Controls
Precautions
Connections
Maintenance and advice
Technical Specifications
5
6
7
8
9
Advertisement
