Page 2
We wish you many happy listening hours. THE MANUAL It is essential to consult this manual before operating your Van Medevoort product. The numbers in the pictures correspond to the features of this product. This manual contains everything you need to know to connect this product in addition to various user options.
Never put any type of object directly on top of the product When in doubt do consult your Van Medevoort dealer. If any object and/or water and/or moisture should find its way into the unit, always disconnect the power cord by its plug, never by the cord itself.
Page 4
1. ON / OFF Power switch. LED indication control. Fully red when switched ON, 50% red when in STANDBY mode (selected with the Van Medevoort Remote Control). Above the LED you will find the Infra Red sensor for the Remote Control.
Page 5
Van Medevoort Service Center. There are no user serviceable parts inside. If you experience any problems, always contact your nearest authorized Van Medevoort Service Center.
Page 6
PRE-OUT. Outputs of the Pre-Amplifier, both RCA- cinch and XLR. To be connected to RCA- cinch or XLR input(s) of the Power Amplifier(s). DC and RC control. DC control can only be used with other Van Medevoort Power Amplifier(s). One can only switch into STANDBY or ON, via the Remote Control.
Page 7
The optimum operating temperature (35° - 40° C) is reached after approx. 60 minutes of continuous play. Then it will be possible to start enjoying the superb van Medevoort audio qualities of this class ‘A’ amplifier. ...
Van Medevoort Audio is the manufacturer of the complete Van Medevoort product line. Next to the renowned Van Medevoort Silver Cable Audio cables we can also supply you with various high quality accessories. For more information, do consult your dealer or contact us at one of the possibilities mentioned below.