Advertisement
Dimensions and Wiring
MPT2.46
86
116.5
Front view
Touch button function: On/off, dimming.
Address modification: Press any of button for 15s, all the backlights will flash, the address of this device can be
changed on HDL Buspro software: submenu "address management→address modify".
Signal interface and fastener: Connect to panel power interface (MPPI.46).
Split gap: Insert a slotted screwdriver to the split gap, separate the panel and power module (MPPI.46).
Installation
Panel
Installation: Hold the edge of panel (shown as above), insert the power interface module vertically. Do not
push the panel too hard.
Split: Insert a 2.5mm-screwdriver to the split gap, pry up from position 1 to 2,and then the wiring hole will open.
Then separate the panel and MPPI.46.
Glass plate replacement: Insert a small size straight screwdriver into the gap of the left side or right side of glass
cover (shown as above), to pick up the glass cover, then put the new cover in right place , then press the grey
area to lock the cover
Professional Home and Building Automation
www.hdlautomation.com
MPT4.46
10.5
83.5
Side view
Panel power interface
（MPPI.46）
MPT6.46
Signal interface
Fastener
Split gap
Back view
Separate panel and power interface
US wall box
Do you need help? Contact with us
support1@hdlchina.com.cn
HDL - MPT2.46
HDL - MPT4.46
HDL - MPT6.46
2
1
2/ 2
Advertisement
