Advertisement
The guidance given on this page is the most common form of connection. However please check with your
manufacturer's instruction books for specific information. Make sure all connections are made with both your
VCP and additional appliance unplugged from the mains to avoid damaging your equipment. Connecting a
VCP using Audio/Video cable is one of the best ways to achieve optimum sound and picture quality from
video-tape playback. If you own a TV with AV input sockets, then connect your VCP this way.
If you TV does not have AV input sockets, then connect your VCP to the TV by means of the RF cable
supplied
Audio/Video Cable
If you use a Audio/Video cable, picture
and sound quality of video-tape playback
will be improved.
Back view of your VCP
Television
AERIAL
AUDIO IN
VIDEO IN
(not supplied)
or
40
32
AUDIO
VIDEO
CHANNEL
OUT
+
DC IN 12V
IN
RF Connection
Cable
(75 Ohms)
Do not try and force the
connector into place, it
should plug in easily.
(not supplied)
Aerial
RF.OUT
AERIAL
If you connect your
VCP using the
supplied RF
Connection Cable
(75 Ohms) you will
have to tune in a
video channel on
your TV in order to
view video tapes.
Further on in the
book you will be
given guidance on
how to tune in your
TV.
Make sure all
appliances are
unplugged from
the mains before
connecting.
5
Advertisement
