Advertisement
+
DC IN 12V
12
Your VCP is designed for in-home or portable use. You can power it from the cigarette lighter socket in your
vehicle or a 12V DC power source.
DC Input Socket
Plug DC power cord into
TV
either the 12-volt DC outlet
or cigarette lighter socket.
Plug the other end into the
DC input socket on your
VCP.
AUDIO VIDEO
AERIAL
IN
OUT
Do not leave your VCP in a
TO AUDIO/VIDEO
place where the
IN
temperature exceeds 70°C
TO AUDIO/VIDEO
(158°F), or the pick-up
OUT
device may be damaged.
RF.OUT
RF.OUT
40
40
32
32
AUDIO
VIDEO
Examples include :
CHANNEL
CHANNEL
OUT
OUT
AERIAL
AERIAL
• Inside a car with the
K
AUDIO
VIDEO
+
G
DC IN 12V
IN
IN
Back of VCP
• Near a heating appliance.
DC POWER
CORD
socket to avoid battery
3 amp. fused
drain.
negative ground
windows closed and in
direct sunshine.
Warning
When your VCP is
not in use, always
disconnect it from
the cigarette lighter
Your VCP and its DC power cord are designed
for use in vehicles that have 12-volt, negative
ground electrical systems. (This is standard for
most vehicles.) If your vehicle has a different type
of electrical system, the DC power system cannot be
used.
To prevent electrical shock and possible damage to your
VCP or vehicle, always unplug DC power cord from the
cigarette lighter socket before you remove the plug from
your VCP.
A 3 amp. 125 or 250V fuse for protection is installed in
the DC power cord.
While the engine is being started, disconnect the DC
power cord from the car's cigarette lighter socket.
Do not operate your VCP when the car battery is
discharged. Peak current from the car generator may
cause the DC fuse to blow.
If the vehicle's supply voltage drops below approximately
10 volts, your VCP may not work properly.
Advertisement
