Cardinal Health Premier Plus Installation And Operation Manual
  1. Manuals
  2. Brands
  3. Cardinal Health Manuals
  4. Refrigerator
  5. Premier Plus
  6. Installation and operation manual

Cardinal Health Premier Plus Installation And Operation Manual

Laboratory refrigerators
Hide thumbs
Table of Contents

Advertisement

Quick Links

Cardinal Health™ Premier Plus
Laboratory Refrigerators
Installation and Operation
CAX1205GA, CAX1205GD
CAX1205SA, CAX1205SD
CAX1205PA, CAX1205PD
CAX2305GA, CAX2305GD
CAX2305CA, CAX2305CD
CAX2305SA, CAX2305SD
CAX2305PA, CAX2305PD
CAX3005GA, CAX3005GD
CAX3005CA, CAX3005CD
CAX3005SA, CAX3005SD
CAX3005PA, CAX3005PD
CAX4505GA, CAX4505GD
CAX4505CA, CAX4505CD
CAX5005GA, CAX5005GD
CAX5005CA, CAX5005CD
CAX5005SA, CAX5005SD
CAX5005PA, CAX5005PD

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Premier Plus and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Cardinal Health Premier Plus

Summary of Contents for Cardinal Health Premier Plus

  • Page 1 Cardinal Health™ Premier Plus Laboratory Refrigerators CAX1205GA, CAX1205GD CAX1205SA, CAX1205SD Installation and Operation CAX1205PA, CAX1205PD CAX2305GA, CAX2305GD CAX2305CA, CAX2305CD CAX2305SA, CAX2305SD CAX2305PA, CAX2305PD CAX3005GA, CAX3005GD CAX3005CA, CAX3005CD CAX3005SA, CAX3005SD CAX3005PA, CAX3005PD CAX4505GA, CAX4505GD CAX4505CA, CAX4505CD CAX5005GA, CAX5005GD CAX5005CA, CAX5005CD CAX5005SA, CAX5005SD...
  • Page 2 Cardinal Health makes no representations or warranties with respect to this manual. In no event shall Cardinal Health be held liable for any damages, direct or incidental, arising from or related to the use of this manual.

  • Page 3: Table Of Contents

    Table of Contents 1. Models ....................................1 2. Safety Precautions................................2 3. Unpacking .................................... 4 4. Packing List ..................................5 5. General Recommendations ............................6 Temperature Monitoring ............................... 6 Intended Use ..................................6 6. Operating Standards ...............................7 Unit Specifications ................................7 7.
  • Page 4 10. Chart Recorder (Optional) ............................25 Set Up and Operation ..............................25 Changing Chart Paper ..............................26 Power Supply ..................................26 Calibration and Adjustments ............................26 11. Temperature Transmitter (Optional) ........................27 Powered Temperature Transmitter ..........................27 Unpowered Temperature Transmitter........................27 12. Maintenance ..................................28 Cleaning the Cabinet Interior ............................28 Cleaning the Condenser Filter ............................28 Cleaning the Condenser ...............................28 Automatic Defrost ................................28...

  • Page 5: Models

    Refer to Section 6.1 for details on the voltage specifications for the various models. Table 1. Applicable Model Unit Model (*) Cardinal Health - CH1205G* Cardinal Health - CH1205S* Cardinal Health - CH1205P* Cardinal Health - CH2305G* Cardinal Health - CH2305C*...

  • Page 6: Safety Precautions

    2. Safety Precautions In this manual, the following symbols and conventions are used: This symbol when used alone indicates important operating instructions which reduce the risk of injury or poor performance of the unit. WARNING: This symbol indicates potentially hazardous situations which, if not avoided, could result in serious injury or death.
  • Page 7 WARNING: Your unit must be properly grounded in conformity with national and local electrical codes. Do not connect the unit to overloaded power sources. WARNING: Disconnect the unit from all power sources before cleaning, troubleshooting, or performing other maintenance on the product or its controls. WARNING: This unit is not for storage of flammable materials.

  • Page 8: Unpacking

    3. Unpacking At the time of delivery, be sure to inspect the unit packaging for damage before signing for the shipment. If packaging damage is present, request immediate product inspection and file a claim with the carrier. Note Packaging damage does not denote that unit damage exists. If concealed damage is found (damage that is not apparent until the item has been unpacked), stop further unpacking and save all packing for carrier's inspection.

  • Page 9: Packing List

    4. Packing List Inside the refrigerator cabinet is a bag containing: • Installation and Operation Manual • Certificate of Conformance • Safety Data Sheet for Glycerin • Quick start guide • Two control panel keys • Two cabinet door keys If you have ordered a unit with shelves, the bag will also contain: •...

  • Page 10: General Recommendations

    5. General Recommendations This section includes some general recommendations for your unit. 5.1 Temperature Monitoring IMPORTANT NOTE We recommend the use of a redundant and independent temperature monitoring system so that the refrigerator can be monitored continuously for performance commensurate with the value of product stored. 5.2 Intended Use The 5°C refrigerators described in this manual are high performance units for professional use.

  • Page 11: Operating Standards

    6. Operating Standards The refrigerators described in this manual are classified for use as stationary equipment in a Pollution Degree 2 and Overvoltage Category II environment. These units are designed to operate under the following environmental conditions: • Indoor use •...

  • Page 12: Installation

    7. Installation WARNING: Do not exceed the electrical rating printed on the dataplate located on the upper left side of the unit. CAUTION: Do not move the unit using the drain pan on the back. This could cause damage to the equipment. 7.1 Location Install the unit on a level area free from vibration with a minimum of 6 inches of space on the sides and rear and 12 inches at the top.

  • Page 13: Convenience Outlet (Chromatography Refrigerators)

    7.3 Convenience Outlet (Chromatography Refrigerators) Chromatography Refrigerators are equipped with a convenience outlet located on the back wall. Power to the outlet is protected by a circuit breaker. If there is a fault, the circuit can be reset by toggling the Chromatography Power Inlet Switch (Item D in Figure 2).
  • Page 14 7.3.3 Power Inlets The chromatography refrigerator has two power inlets at the back of the unit: 1. Main Power Inlet (A)- This is used to connect the AC mains power cord to the chromatography refrigerator. 2. Chromatography Power Inlet (C) - This is used to connect the AC mains power cord to the chromatography outlet assembly inside of the cabinet.

  • Page 15: Shelves

    7.4 Shelves Single door laboratory refrigerators come standard with 4 full shelves and double door laboratory refrigerators come standard with 8 full shelves. Single door chromatography refrigerators come standard with 2 half shelves. Double door chromatography refrigerators come standard with 4 full shelves and 2 half shelves. Maximum shelf capacity is 45 kg (100 lbs) for full shelves and 22.5 kg (50 lbs) for half shelves.
  • Page 16 7.5.2 Reinstalling the Drawers To reinstall the drawers, complete the following steps (refer to Figure 4): 1. Pull both the slides of the drawer towards you until the slides are fully extended. 2. Position the drawer between the slides and with the back facing end raised at 45 degree angle, insert the mounting clips at the front into the slots on front of the slides.
  • Page 17 Figure 7. Slide Rotation 5. Pull the slide towards the front of the cabinet. 6. Determine desired location for the slide and insert the slide into the rear pilaster at a 45 degree angle towards the center of the cabinet. 7.

  • Page 18: Baskets

    7.6 Baskets CH1205P pharmacy refrigerators come standard with 5 wire baskets, CH2305P and CH3005P pharmacy refrigerators with 6 wire baskets, and CH5005P pharmacy refrigerators with 12 wire baskets. Baskets are shipped in a factory installed position that promotes uniform spacing between the baskets. The basket slides are adjustable to higher and lower positions in the cabinet.

  • Page 19: Remote Alarm (Optional)

    The sliding glass doors can be locked once they are in the closed position using the key provided. To lock these doors: 1. Locate the lock in the middle of the cabinet at the bottom of the doors. 2. Rotate the lock lever clockwise from the upwards to downwards position. 3.

  • Page 20: Final Checks

    To install the remote alarm, make the following connections: Connect the COMMON terminal on the cabinet switch to the COMMON wire on the alarm. 2a. To get an alarm when the switch contacts open, connect the OPEN ON FAIL terminal on the cabinet to the OPEN ON FAIL wire on the alarm.

  • Page 21: Startup

    8. Startup 8.1 Initial Startup To start up the refrigerator, complete the following steps: 1. Verify that the sensor probe(s) have been installed in the bottle(s) as described in Section 7.7. 2. Connect the AC mains power cord to the mains power inlet connector. 3.

  • Page 22: Product Loading And Unloading Guidelines

    8.2 Product Loading and Unloading Guidelines When loading your laboratory refrigerator, take care to observe the following guidelines: • Distribute the load as evenly as possible. Temperature uniformity depends on air circulation, which could be impeded if the internal storage components are overfilled, particularly at the top of the cabinet. •...

  • Page 23: Operation

    9. Operation 9.1 Control Panel Figure 12. Refrigerator Control Panel The control panel is located on the top right side of your refrigerator. You can use the three pushbuttons (#5, #8, and #9 in Figure 12) to change the temperature display (#1) or to adjust temperature and alarm setpoints, as given in Section 9.3. The thermometer display (#2) provides a quick visual indicator of current cabinet temperature and alarm conditions.

  • Page 24: Display Functions

    When cabinet temperature exceeds the warm alarm setpoint, the top bar of the thermometer flashes. When temperature is lower than the cold alarm setpoint, the bulb flashes. When you are in programming mode (described in Table 7) the thermometer shows the setpoint value you are changing. 3.

  • Page 25: Programming Functions

    9.3 Programming Functions You can enter the programming mode by pressing the Scan button ( ) and holding for approximately 5 seconds. The display SCAN will then flash “Prg” to indicate that you have entered the programming mode. Use ( ) and ( ) buttons to modify the values and press the Scan (...
  • Page 26 Table 8. Service Parameters Screen/Button Display Function Summary Allows the user to see what temperature the unit is SEr 05 Temp of unit designed to run. Shows the current checksum of the CPU board for Varies CPU Checksum validation. Initial Screen Shows the current checksum of the Relay board for Varies Relay Board Checksum...

  • Page 27: Temperature Settings

    Screen/Button Display Function Summary The maximum amount of time the defrost cycle will run dEF dur Defrost Duration Press Scan ( SCAN in minutes. The maximum temperature that the defrost probe can dEF Hi Defrost Temp Out Press Scan ( SCAN reach before stopping the defrost cycle.

  • Page 28: Alarms

    9.6 Alarms The alarm system is designed to provide visual and audible warning signals for both power failure and rise in temperature. The alarm is equipped with a battery backup. Default cold and warm alarm values are 2°C and 8°C. These values may be adjusted, following instructions in Section 9.3. The alarm system is activated only when the key switch is turned to the Alarm On position.

  • Page 29: Chart Recorder (Optional)

    10. Chart Recorder (Optional) Panel-mounted six inch recorders are available as a factory-installed option. Recorder operation begins when the system is powered on. 10.1 Set Up and Operation To prepare the recorder to function properly, complete the following steps: 1. Open the recorder door to access the recorder. 2.

  • Page 30: Changing Chart Paper

    Figure 14. Pressure Sensitive Chart Buttons 10.2 Changing Chart Paper To change the chart paper, complete the following steps: 1. Locate the pressure sensitive buttons at the front, upper left of the recorder panel. 2. Press and hold the change chart button (#3 in Figure 14) for approximately one second. The pen will move off the scale. 3.

  • Page 31: Temperature Transmitter (Optional)

    11. Temperature Transmitter (Optional) 11.1 Powered Temperature Transmitter A powered temperature transmitter is an option for this unit. This temperature transmitter allows for remote temperature monitoring of your system. To connect your remote temperature monitoring system to the powered temperature transmitter, refer to Figure 15 below. Figure 15.

  • Page 32: Maintenance

    12. Maintenance WARNING: Disconnect equipment from main power before attempting any maintenance to equipment or its controls unless stated otherwise. 12.1 Cleaning the Cabinet Interior To clean the cabinet interior, remove the shelves, drawers or baskets following the instructions in Section 7.4, Section 7.5 and Section 7.6. Use a solution of water and a mild detergent for cleaning.

  • Page 33: Gasket Maintenance

    12.5 Gasket Maintenance Periodically check the gaskets around the door for punctures or tears. Leaks are indicated by condensation or frost which forms at the point of gasket failure. Make sure that the cabinet is level (refer to Section 7.1.1 for leveling information). Keep the door gaskets clean and frost free by wiping gently with a soft cloth.

  • Page 34: Troubleshooting

    13. Troubleshooting WARNING: Troubleshooting procedures involve working with high voltages which can cause injury or death. Troubleshooting should only be performed by trained personnel. This section is a guide for troubleshooting equipment problems. Table 9. Troubleshooting Procedures Problem Cause Solution Check that the cord is securely plugged in.
  • Page 35 Table 9. Troubleshooting Procedures Problem Cause Solution Perimeter Heater Unit is warm This is a normal function of the unit and is a result of the perimeter heater is ON (swinging around door frame to reduce condensation. doors only) Door is open Make sure the door is completely closed.

  • Page 36: End Of Life Care

    14. End of Life Care Be sure to follow local regulations when disposing of an old unit. Some suggestions are listed in the following: 1. Remove items and defrost unit. Be sure to clean up any biological safety hazards. 2. Remove the cabinet door to help prevent entrapment inside of a unit. 3.

  • Page 37: Warranty

    15. Warranty During the first twenty four (24) months from shipment from the manufacturing facility, the manufacturer through its authorized Dealer or service organizations, will at its option and expense repair or replace any part found to be non-conforming in material or workmanship with the exception of the compressor which is covered for an additional 5 years (60 months) from the time of the shipment from the manufacturing facility.
  • Page 38 (This page intentionally left blank)
  • Page 39 (This page intentionally left blank)
  • Page 40 Cardinal Health Waukegan, IL 60085 USA 2019-07 cardinalhealth.com © 2019 Cardinal Health. All Rights Reserved. CARDINAL HEALTH and the Cardinal Health LOGO are trademarks of Cardinal Health and may be registered in the US and/or in other countries. 328018H01 Rev. D...

This manual is also suitable for:

Cax1205gaCax1205gdCax1205saCax1205sdCax1205paCax1205pd ... Show all

Table of Contents