Contents; Helpful Symbols; Safety Information - AquaScape 96030 Instruction And Maintenance Manual

Contents

No. Description
1. Automatic Dosing System
2. 6-Watt Transformer
3. Discharge Tubing 6'
4. Output Hose Holder
5. Water Treatment
6. Mounting Plate

Helpful Symbols

WARNING Symbol - Will alert you to the
possibility of damage, injury or death if you do
not comply with the warnings that accompany
them. The hazard may come from something
mechanical or from electrical shock.

Safety Information

WARNING: Risk of electric shock – This
product has not been approved for use
in swimming pool or marine areas.
WARNING: To provide continued protection
against risk of electric shock, connect to
properly grounded, ground fault circuit
interrupter (GFCI) outlets only.
PLEASE NOTE: Aquascape Automatic
Dosing System water treatments have
been specifically formulated to work with
the Aquascape Automatic Dosing System.
Using water treatments not designed for use with the
system may permanently damage the unit and void the
warranty.
WARNING: This product is weatherproof but
is not designed to be submersed in the water
or operated at ambient temperatures below
40°F/4°C.
☎
aquascapeinc.com | CAN (866) 766-3426 |
Contents
3
5
(A) Have a qualified electrician install a properly grounded
(B) Inspect cord for damage before using.
(C) If an extension cord is required, be sure it is rated for
(D) Any wiring of this product should be performed by a
(E) To reduce risk of electrical shock, all wiring and
(F) The power cable should be protected at all times to
(G) Never handle power cords with wet hands.
(H) Unplug system at receptacle outlet when not in use.
(I) Do not remove cord and strain relief. Do not connect
(J) Do not use power cable to lift the Automatic Dosing
☎
US (866) 877-6637
1
TIP Symbol - Helpful information provided by a
professional pond installer.
receptacle outlet, acceptable for outdoor use when
protected from direct sunlight, snow and rain. If
possible, locate the outlet or filter so that the power cord
will reach the outlet without an extension cord.
outdoor use.
qualified electrician to ensure code compliance and user
safety.
junction connections should be made per local codes.
Requirements may vary depending on usage and
location.
avoid punctures, nicks or abrasions.
conduit to product.
System.
6
2
4
3