How To Wear Embraceplus; Charging Embraceplus - Empatica EmbracePlus User Manual

How to wear EmbracePlus

It is important that EmbracePlus is worn correctly to ensure all the device sensors are in contact
with the user's body. Correct contact between sensors and the user's body ensures correct
physiological parameters collection and computation.
Wear the EmbracePlus with the pod on top of the wrist, so the display faces upwards and the
PPG sensors is on the bottom, touching the skin. The EDA electrodes found on the band should
line up on the bottom of the wrist. Line them up under the middle and ring fingers.
Wrap the band over snaps and tighten. Make sure the EmbracePlus band is tight enough to
ensure the EDA electrodes do not change position on the skin during normal movement but not
so much as to constrict blood flow or cause discomfort. Adjust the band by sliding up the wrist
towards the elbow until it is snug. Reposition the band if it becomes loose during use.

Charging EmbracePlus

EmbracePlus shall be exclusively charged using the provided On-Wrist Charger. While worn, the
EmbracePlus should be charged with the OWC not connected to a power source. While the
EmbracePlus is not worn, the OWC can be connected to a power source and either charge the
EmbracePlus' battery or its own battery.
EmbracePlus battery cannot be replaced neither from the user nor from Empatica personnel
The information contained in this document is confidential and is the property solely of Empatica, S.r.l.. Any reproduction in part or in whole without
the written permission of Empatica, S.r.l. is prohibited. © Empatica S.R.L, 2021. All rights reserved.
28