Safety and Comfort
Å
Before You Call for Technical Support
✎
Troubleshooting Guide
WARNING: Misuse of the computer or failure to establish a safe and
comfortable work environment may result in discomfort or serious injury.
Refer to the Safety & Comfort Guide on the Documentation CD and
available at
www.hp.com/ergo
workspace and creating a safe and comfortable work environment.
If you are having problems with the computer, try the appropriate
solutions below to try to isolate the exact problem before calling for
technical support.
■
Run the diagnostics utility (available for some models only).
Refer to
"Downloading HP Insight Diagnostics"
information on downloading the utility.
■
Run the Drive Protection System (DPS) Self-Test in Computer
Setup. Refer to the Computer Setup (F10) Utility Guide on the
Documentation CD for more information.
The Drive Protection System (DPS) Self-Test software is available on
some models only.
■
Check the Power LED on the front of the computer to see if it is
flashing. The flashing lights are error codes that will help you
diagnose the problem. Refer to
to interpret the codes.
■
If the screen is blank, plug the monitor into a different video port
on the computer if one is available. Or, change out the monitor
with a monitor that you know is functioning properly.
www.hp.com
Troubleshooting
for more information on choosing a
"Interpreting Diagnostic Lights"
for more
1