Panasonic PT-47WXD63G Service Manual page 64

Procedure:
Apply the convergence alignment template to the PTV screen frame to converge the green
raster only. Remove the convergence alignment template following this alignment. The red and
blue rasters can then be aligned to the green raster.
Raster Set-Up:
1. Enter to service mode (red CHK).
2. In SET-UP (menu) enter to "Other Adj." menu and set
CONVERGENCE values (GH, GV) to 0.
3. Cover red & blue lens with caps.
4. Apply a pattern to adjust with 1080i format:
5. Select "COARSE" DAC, then press OK to enter to "Coarse
adjustment" mode.
6. Press "0" key on remote.
7. Press OK key on remote to enter to "TEST_POS" mode.
8. Move pattern by pressing VOL right - left and CH up - down so that
the cursor center overlap monoscope pattern center.
9. Press "5" key on remote to exit superimpose mode (monoscope
pattern disappear).
10. Press "TV/VIDEO" key to enter "DATA_POS" mode
11. Adjust by pressing VOL right - left so that peak of curve is the
same position as center of cursor
Aligned cross-hair pattern with center of picture pattern
Symmetrical shape
64