Page 1
IMPORTANT : DUE TO THE HEAVY WEIGHT OF PLASMA SCREENS, B-TECH RECOMMENDS THAT A PROFESSIONAL INSTALLER IS USED WHEN MOUNTING THIS BRACKET AND PLASMA. B-TECH INTERNATIONAL LTD., ITS DISTRIBUTORS AND DEALERS ARE NOT RESPONSIBLE FOR DAMAGE OR INJURY CAUSED BY IMPROPER INSTALLATION.
Page 2
ASSEMBLY AND INSTALLATION Locate Mounting Holes Place the Plasma Screen down on the floor, table or other suitable Assemble the Interface Kit surface (take care not to damage the screen). Slide the Adaptor Plates onto the Interface Plate as above (this part may The Adaptor Plates may be fitted either way Note where the mounting holes are located on the back of the come pre-assembled).