Power PW-A User Manual

HAND DRYER
PW-A
USER MANUAL
Technical Parameters
Voltage 220V
Input 1150W
Wind Speed 70M/S
Heating Power 800W
WARNING
If you don't use this unit properly or follow the safety guidelines carefully,
It would lead to serious personal injury or property damage
•
Do not open the front panel.
Otherwise, this may get an electric shock.
Prohibition
•
Do not allow the unit get wet,
Otherwise, it will cause electric shock.
Do not allow the
unit get wet
•
Do not use in a wet environment, for example, near the
bathroom where it may get the direct water and the
places where the condensation may fogging. Otherwise,
Do not use at
bathtub or
this may cause electric shock and unit malfunction.
shower room
• Do not modify and disassemble the unit unnecessarily.
Otherwise, this may cause a fire, electric shock, or personal injury.
Prohibit
Disassembling
•
220-230v,50Hz or 110-120V 60Hz is required.
•
If power tolerance is over +/-10%, there will be breakdown. If using
Please do
complying
incorrect power supply , it may cause fire, electric shock and machine malfunction.
with instruction
•
Pls using dedicated socket. If using together with other appliances,
the socket may cause abnormal heat leading to fire.
•
Power must be cut of when maintenance to prevent the risk of electric shock.
•
Must be Installed by similarly qualified persons. It may cause electric shock or fire.
•
Must install residual current circuit-breaker . Otherwise, it may cause electric shock.
•
Do not put things on the machine.
Prohibition
•
If the machine doesn't work or have abnormal conditions,
please cut off power to prevent accidents; and close leakage
Please do
complying with
circuit breaker and ask supplier to check and repair. Or it may
instruction
lead to fire because of electricity leakage and short circuit.
Attention when installation:
•
Do not install when the machine is power connected.
•
Must be Installed by similarly qualified persons, and on the wall which is
hard enough. Otherwise, it may cause damage by dropping.
•
Must install residual current circuit-breaker. Otherwise, it may cause electric shock.
Motor Type BLDC motor
Sensing Distance 9-15cm
Appearance Size 278x245x163mm
N.W 3.8KG