Page 1: Table Of Contents
Instruction Manual High-Speed Hand Dryer Safety Cautions Spare Parts Dimension Drawing Functional Introduction How to use Electrical wiring diagram Installation procedures 6～8 9～10 Maintenance 11～12 Troubleshooting Specifications Thank you for your purchasing. Please read all of the instructions thoroughly before attempting the installation and operation.
Page 2: Safety Cautions
WARNING Always use specified power supply. Otherwise, a fire could result. Do not damage the power line. Continued use of a unit with a damaged line could cause fire, electric shock, or product problems. Never disassemble, repair or modify the product. Doing so could cause fire or electric shock.
Page 3: Spare Parts
Spare parts Indicator light Vent Sensor LED light Adjusting switch FULL line Water level indicator lamp HEPA filter HEPA Filter No-spill water channel Drain tank Power cord Dimension Drawing （mm）...
Page 4: Functional Introduction
Functional Introduction Switch Mode Power off Power on Low speed High speed Heater off Heater on...
Page 5: How To Use
How to use Repeat Ouststretch fingers and insert hands Afert the dryer is activated, slowly all the way into the product. lift hands white water is blown off. Move hands side to side if dryer does not activate. CAUTION Small water drops may spread around if user moves hands violently when drying hands.
Page 6: Electrical Wiring Diagram
If the earth leakage circuit breaker is not installde, electric shocks could occur if there is a malfunction or a short circuit. Use a power line of the rated capacity and connect it securely. An insecure connection may result in fire. CAUTION Install the main dryer unit on a flat and vertical wall strong enough to support it securely.
Page 7: Installation Procedures
Use screws with drawing strength of 1000N or more. Power supply Check parts Install a single Earth leakage circuit breaker with a sufficient current rating and rating and apply the specified power. Earth leakage Rated 10 A or more circuit breaker AC220 ～...
Page 8 Height of the installation of the base plate For Man 900mm For Woman 870mm For disabled 800mm For Children 700mm 3 The location of power line. 认电源线长度 4 The length of the power line 5 Install the machine 500mm 200mm 40mm...
Page 9 6 Installation of Anti-theft screw 7 Install filter screen 8 Confirm the switch position 9 Test operation 10 Installation drain tank Lighting Lock...
Page 10: Maintenance
Do not use acid or alkali chemicals designde for cleaning toiltes. Do not use benzine, thinners or cleansers. Do not use nylon sponges or dry cloth. Before cleaning, turn off the power switch. Failure to do so could result in sudden activation of the product.
Page 11 Drain tank （When the water is full, clean it in time） FULL line HEPA Filter （Once every 100 days to 150 days ） Cleaning filter box Take out the HEPA filter and replace it...
Page 12: Troubleshooting
Is the Fan Strength Switch set to Low? See page 3 Set the Fan Strength to High. If the problem still prosists after preforming suggested actions, turn off the power switch and set the breaker to Off. Please contact the supplier.
Page 13 Indicators Operation the product/ Stautus indicator lights Meaning or the indicators Corrective actions Always ON Power is being supplied An indicator is lit dimly (Standby) all the time. Indicator light Always On Power is being supplied An indicator is lit brighter (While the dryer is than standby.
Page 14: Specifications 1
Description Item High-Speed Hand Dryer Model name Model number ～～ AC220V 240V 50Hz 60Hz Power Rating Power supply specifications Directly connect to power supply Heater on 1600W High speed 700W Heater off Heater on 1200W speed Heater off 500W Standby power consumption Approximately 2.3W or lower...

Power PW-70-3 Instruction Manual

Quick Links

Need help?

Questions and answers

Related Manuals for Power PW-70-3

Summary of Contents for Power PW-70-3

Table of Contents