Download Print this page
Dancing Wings Hobby 1.2M Piper J3 Cub Instruction Manual

Dancing Wings Hobby 1.2M Piper J3 Cub Instruction Manual

Balsawood airplane

Advertisement

Quick Links

注意事项
SAFETY PRECAUTIONS
这个产品不是玩具,而是一个复杂的具有难度的飞行器。您和您身边人的安全取决于您如何操作它,您需要了解相关知识,并谨慎操作。禁止
没有成人陪伴的儿童独自操作该设备。不适合14岁以下人群使用。再次强调,这不是一个玩具。
This product should not be considered a toy, but rather a complicated and sophisticated flying model. Your safety depends
on how you use and fly it, If not correctly operated, could cause injury to you or your family members. Children must be
accompanied by an adult at all times if operating this product. Not suitable for children under the age of 14. THIS IS NOT A
TOY.
● 不要在机场,军事基地,居民区或其他任何受限制的地方飞行。
● Do not fly around some restricted location like airports, military bases, residential areas, etc.
● 您需要对发射机进行距离检查,以确保没有收到任何干扰。
● You will need to range check the transmitter to be sure you are not experiencing any interference.
● 始终保持先打开发射机后打开接收机,先关闭接收机后关闭发射机的步骤。
● Always turn on the receiver last after turning on the transmitter and shut off the receiver first before turning off the transmitter.
● 如果您是初学者,建议您在有经验玩家的协助下调试和飞行。
● If you are only a beginner to the radio control model flying, do not attempt to fly your model without any assistance or advice from
advanced expert fliers.
● 请将相关物品放置在孩子们够不到的地方
● Keep relevant items out of reach of children.
● 这个设备的设计已经超过我们正常使用所需要刚性要求,但若您需要以超出我们推荐的动力飞行时,请合理控制动作幅度并适当增加机体强度。
● This product has been flight tested to meet or exceed our rigid performance and reliability standards in normal use,if you plan to perform
any high-stress flying, you are solely responsible for taking any and all necessary steps to control movement range and reinforce the body
strength.
● 您的设备中可能包括一些玻纤和碳纤雕刻的部件,这些纤维部件所带的粉尘可能会引起眼睛,皮肤的不适,请您在需要的时候带上护目镜或者防尘服。
● This product may include some fiberglass and carbon-fiber reinforced plastic parts,which may cause eye and skin discomfort,pls wear the
goggles or dust-proof clothes when needed.
● 因航空运输安全管制,您收到的产品可能没有清单中出现过的胶水,请您理解无法发送胶水给您的原因。您可以在当地文具店很方便的购买到您所需要
的胶水。
● Due to air traffic safety control, the products you receive may not have the glue that appears in the list. Please understand and purchase the
glue you need at your local stationery store.
http://www.dwhobby.com/
Balsawood Airplane
历史背景
Piper J-3 Cub是20世纪30年代最受欢迎的商用飞机。机身长度7码,独有的黄色和黑色涂装方案成为它标志性的特点,J-3做为那个时代最重
要的教练机型,最终在第二次世界大战结束时训练了80%的美国军事飞行员。由于简单的结构,大约每20分钟就有一个新的J-3 Cub在流水线
上生产出来,很多J-3 Cub飞机今天还在飞行。
The Piper J-3 Cub was the most popular commercial aircraft of the 1930's. Barely seven yards long and instantly recognizable in
its yellow-and-black paint scheme, this nostalgic favorite became the foremost trainer of the era, eventually training 80% of the
United States' military pilots by the end of World War II. A new Cub was rolling of the assembly line nearly every 20 minutes, and
many of these beloved airplanes are still around today.
推荐配置
飞行参数
翼展: 1200mm
马达: 2212-2216 900-1200KV
机长: 725mm
电调: 20-30A
起飞重量≈750g
桨叶: 9-10寸
舵机: 9g*4
Wingspan: 1200mm
电池: 3s 2200-2800mAh
Length: 725mm
通道≥4CH
Flying Weight≈750g
Motor: 2212-2216 900-1200KV
ESC: 20-30A
Propeller: 9-10 inch
Servos: 9g*4
Battery: 3s 2200-2800mAh
Radio≥4CH
S23

Advertisement

loading

Summary of Contents for Dancing Wings Hobby 1.2M Piper J3 Cub

  • Page 1 Balsawood Airplane 注意事项 SAFETY PRECAUTIONS 这个产品不是玩具,而是一个复杂的具有难度的飞行器。您和您身边人的安全取决于您如何操作它,您需要了解相关知识,并谨慎操作。禁止 ● 没有成人陪伴的儿童独自操作该设备。不适合14岁以下人群使用。再次强调,这不是一个玩具。 ● This product should not be considered a toy, but rather a complicated and sophisticated flying model. Your safety depends on how you use and fly it, If not correctly operated, could cause injury to you or your family members. Children must be accompanied by an adult at all times if operating this product.
  • Page 2 散件 KIT 工具 Tools Needed 01-4 F1*2 爪牙螺母 Claw nut 01-3 配件图仅做参考用,您收到的实物可能因为修改/优化的原因导致与图片有略有不同。 Photos shown here just for reference, the product you received maybe slightly differ from the photos due to continuous improvement on products. 磁铁 Magnet 机身组装 拼装另一边侧板,并在图示位置 注意:进行拼装时,用美工刀从板材下取下各部件,用快干胶水 Assemble the Fuselage 01-5 嵌入3x3mm轻木条,胶水固定。...
  • Page 3: Cowling Installation

    机翼组装 机翼组装参照机翼1:1图纸进行,并在平整工作台上进行 Assemble the Wing 组装,保持机翼平直。 01-9 The wing is assembled as per the 1:1 drawing,and assembled on the leveling table to keep the wing straight. C3-1 03-1 背面 back 03-3 03-2 底面 Bottom 01-10 01-11 磁铁 Magnet 翻转 03-4 Turn over 对齐...
  • Page 4 设置和调试 Assemble the Wing and Tail 各部件组装 Components Assembly 起飞重心设置 机翼组装 C.G. Setting Wing Assembly ≈ 68mm 自攻螺丝 Self-tapping screws 自攻螺丝 Self-tapping screws Ø7*400mm 碳管 carbon tube 自攻螺丝 Ø3*200mm碳管 carbon tube Self-tapping screws 底面 Bottom 调整好重心后即可进行试飞 After adjusting the center of gravity, you can test flight. 起落架组装...
  • Page 5 地面控制方向测试 Control Directions Tests 遥控器动作 飞机反应 升 升降杆下拉 降 Lifting rod down 舵 升降杆上推 Lifting rod up 转向杆向右 副 翼 Steering rod to the right 转向杆向左 Steering rod to the left 方 方向杆向右 向 Direction rod to the right 舵 方向杆向左...
  • Page 6: Pre-Flight Checks

    飞行前的建议 PRE-FLIGHT CHECKS ● 安装舵机前,请先将舵机通电让舵机中心点回中,以便能更好的调试舵面。 ● Check/adjust servo centering, in order to adjust the control surface better. ● 初次启动电机,您需要确认电机旋转的方向以适配您的机型。 ● Double-check the spinning direction of motor at first usage, and sure it’s suitable for your model. ● 请将重心(CG)调整至说明书所述位置并尽量靠近。如果有需要,您可以增加机头或者机尾的重量,以确保机体有更 好的飞行姿态。 ● Set the center of gravity (CG) at the position that manual already marked out. If necessary, add weight to the nose or tail to ensure the best flight performance.