Sharp LC-22LE250E-V Service Manual page 11

Operation Manual (Continued)
Viewing the Connections
Connector
SIDE AV
SIDE AV
HEADPHONE
PC to YPbPr
NOTE: When connecting a device via the YPbPr or Side AV input, you must use a connection cables
to enable connection. See the illustrations above. | To enable PC audio, you will need to use the SIDE AV
CONNECTION cable's WHITE & RED inputs. | If an external device is connected via the SCART socket, the TV
will automatically switch to AV mode.| When receiving DTV channels (Mpeg4 H.264) or while in Media Browser
mode, output will not be available via the scart socket. | When using the wall mounting kit (optional), we recommend
that you plug all your cables into the back of the TV before mounting on the wall. | Insert or remove the CI module
only when the TV is SWITCHED OFF. You should refer to the module instruction manual for details of the settings.
A01_[GB]_MB95S_4847UK_DVBT_C_24205LED_ROCKER_SILVER16_10081844-10083115_50232547_basic IB.indd 11
Type Cables
Scart
Connection
(back)
VGA
Connection
(back)
PC/YPbPr
Audio
Connection
Side Audio/Video
(side)
Connection Cable
(Supplied)
HDMI
Connection
(back)
SPDIF
Connection
(back)
Side AV
(Audio/Video)
Connection
AV Connection Cable
(side)
(supplied)
Headphone
Connection
(side)
YPbPr Video
Connection
(back)
PC to YPbPr Connection Cable (Not supplied)
USB
Connection
(side)
CI
Connection
(side)
English - 11 -
11
Device
PC Audio Cable
(Not supplied)
LC-22LE250
LC-24LE250
28.01.2013 15:50:14