7.
Remove one of the five silver 6-32 standard screws located on the front of the chassis behind the
bezel.
Figure C-7
8.
Replace the front bezel.
9.
Install the security screw next to the middle front bezel release tab to secure the front bezel in
place.
Figure C-8
10.
Replace the access panel.
11.
If the computer was on a stand, replace the stand.
12.
Reconnect the power cord and turn on the computer.
13.
Lock any security devices that were disengaged when the access panel was removed.
56
Appendix C External Security Devices
Retrieving the Front Bezel Security Screw
Installing the Front Bezel Security Screw
ENWW