Samsung Flip 3 User Manual page 57

2nd 3rd
Advanced Settings
Screen Saver
Touch Control Lock
USB Lock
Network Lock
Screen Monitoring Lock
Auto Power Off
PC module power
No Signal/No Interaction Power
Off
Remote Power Control
Remote Management Settings
PIP Capture
Description
Configure advanced settings which includes
Enter your 6 digit PIN number. The default PIN number is "000000".
" If you want to change the PIN number, use the
" Change the PIN to keep your device secure.
Set up the sreensaver. The selected image can be used as a custom screensaver.
Run Touch Control Lock.
" Tap and hold the screen to release Touch Control
Set up a USB Lock. After setting up, the device will be restarted to apply the settings.
• Off / Read-only / All On
Set up a Network Lock.
Block screen images from being monitored by MagicINFO Server.
Choose how long the display will stay on before turning off after no user interaction is detected.
Turns on or off to sync with OPS Power when the power is on or off.
• Synced power-on: When the Flip is turned on, the PC module is automatically turned on as well.
• Synced power-off: When the Flip is turned off, the PC module is automatically turned off as well.
Save power by turning the device off when no signals/touch interactions are received from any source.
Turn Remote Power Control on or off. By activating this feature, the network connection is maintained when the product is
turned off.
Set to connect and control the Flip remotely from other devices.
• Remote Management: Restrict access to the product from other devices via the network.
• Device ID: Set a unique ID number.
• PC Connection Cable: Select the type of cable used to connect the product to a PC.
• Secure Protocol: Secure the protocol between the product and other devices.
Turn PIP Capture on or off.
" HDCP contents will not show on the screen if
USB Lock and Network Lock.
Change PIN function.
Lock.
PIP Capture is set to On.
57