Edision picco T265 Plus User Manual

Congratulations on purchasing an EDISΙON picco T265+
Please note that this information is valid at the time of publication.
Current information and detailed user manuals can be found on the Internet at: www.edision.gr
1
Unpacking
126 mm
Receiver picco T265+
Notes: The front is factory fitted with a protective foil
which can be removed easily and with caution. (Protective foil only for devices with display)
The scope of delivery may also include parts not listed here
Front Panel
1
/ USB: Connection for USB storage devices
2 Display LED, displays current information
3 Infrared sensor for the reception of remote control commands
4 CH- / CH+ buttons: for moving in the program lists
5 POWER button: Activates/Deactivates the device
Back Panel
6 ANT IN: Input for connecting to terrestrial or cable signal
from the antenna
7 S/PDIF: Audio interface for amplifier/audio console
8 HD OUT: Connection to an HDTV quality TV
9 SCART: For connecting to a TV set,
using SCART cable [not for HD TV]
10 Connection for an adapter (DC 5V)
Subpages
11 IR IN: Infrared connection port
2
Connecting and switching on
Note: For trouble-free signal reception your antenna
and cable installation should be calibrated and
inspected by a qualified professional with a digital
TV-level-measuring instrument.
• Connect the receiver using HDMI cable via the
HD OUT output port to your TV's HDMI input port
• Then connect the coaxial cable from the terrestrial
antenna to the ANT IN input of the receiver.
• Insert the batteries into the remote control.
Notes on the remote control can be found on
the back of these instructions.
• Connect the receiver to the power supply.
• The receiver starts with the BOOT process and
is operational within a short time
For information about EDISION Hardware or Software matters, please contact support@edision.gr
The CE certificate of the product is available on our webpage, by visiting this link: https://www.edision.gr/en/support
picco T265
Digital Terrestrial & Cable Receiver DVB-T2/C H.265/HEVC
Remote control with 2 AAA batteries
1
6
After the first start,
choose your language
ANT IN: coaxial-wire
input from terrestrial /
cable signal
HD OUT:
HDMI
Output receiver
kabel
+
Documentation
2
7
8
11
IR
Power socket
HDMI cable
USB
Support
Service note
Please contact
your EDISION
specialist dealer
for any further
support
and service.
5
3 4
9
10
HDMI in
2
1
m
HD i
kabel
TV set connection panel
Use an HDMI input!