HP Brio 8300 Supplementary Manual page 4

HP Brio PC 83xx/84xx/85xx
3. Lift the power supply up and away from the com-
puter and replace with new power supply.
4. Replace the four screws and reconnect all connec-
tors .
5. Replace the cover.
6. Ensure the voltage selector switch is set to the correct
value for the country you live in.
Task 8 Replacing Expansion Cards
Before You Start
• Remove the computer's cover as described in Task 1
"Replacing the Cover".
Replacing Expansion Cards
1. Locate the expansion card and remove the retaining
screw .
2. Carefully lift out the expansion card, making sure that
it does not make contact with any other part of the
computer.
3. Insert the replacement expansion card into the appro-
priate slot.
4. Replace the retaining screw .
5. Replace the cover.
T-15
Page 4 of 4
Part Number 5967-9527-EN