Advertisement
TROUBLESHOOTING
Symptom
Remedy
Sound cannot be heard.
• Adjust the volume to the optimum level.
• Check the cords and connections.
"MISWIRING CHECK
Turn the power off, then check to be sure the terminals
WIRING THEN PWR ON"
of the speaker wires are insulated properly. Turn the
appears.
power on again.
"PROTECTING SEND
Send the unit to the nearest service center.
SERVICE" appears.
Source cannot be selected.
Check the [SOURCE SELECT] setting. ( 4)
•
Radio reception is poor.
Connect the antenna firmly.
•
Static noise while
listening to the radio.
Playback order is not as
The playback order is determined by the file name.
intended.
Elapsed playing time is not
This depends on the recording process earlier.
correct.
Check whether the file is a playable format. ( 17)
"NOT SUPPORT" appears
and file skips.
"READING" keeps flashing.
• Do not use too many hierarchical levels and folders.
• Reattach the USB device.
"UNSUPPORTED DEVICE"
• Check whether the connected device is compatible with
appears.
this unit and ensure the file systems are in supported
formats. ( 17)
• Reattach the device.
"UNRESPONSIVE DEVICE"
Make sure the device is not malfunction and reattach
appears.
the device.
"USB HUB IS NOT
This unit cannot support a USB device connected via a
SUPPORTED" appears.
USB hub.
"CANNOT PLAY" appears.
Connect a USB device that contains playable audio files.
Symptom
Remedy
• The source does not
The USB port is drawing more power than the design
change to "USB" when
limit. Turn the power off and unplug the USB device.
you connect a USB
Then, turn on the power and reattach the USB device.
device while listening
If this does not solve the problem, turn the power off and
to another source.
on (or reset the unit) before replacing with another USB
• "USB ERROR" appears
device.
The iPod/iPhone does not
• Check the connection between this unit and iPod/iPhone.
turn on or does not work
• Disconnect and reset the iPod/iPhone using hard reset.
"LOADING" appears when
This unit is still preparing the iPod/iPhone music list. It
you enter search mode by
may take some time to load, try again later.
pressing
.
Correct characters are not
•
This unit can only display uppercase letters, numbers,
displayed.
and a limited number of symbols.
•
Depending on the display language you have selected
( 5), some characters may not be displayed
correctly.
•
Sound cannot be heard
• Reconnect the Android device.
during playback.
• If in [AUDIO MODE], launch any media player
•
Sound output only from
application on the Android device and start playback.
the Android device.
• If in [AUDIO MODE], relaunch the current media player
application or use another media player application.
• Restart the Android device.
• If this does not solve the problem, the connected Android
device is unable to route the audio signal to unit. ( 18)
Cannot playback at
• Make sure JVC MUSIC PLAY APP is installed on the
[AUTO MODE].
Android device. ( 7)
• Reconnect the Android device and select the appropriate
control mode. ( 8)
• If this does not solve the problem, the connected Android
device does not support [AUTO MODE]. ( 18)
ENGLISH
19
Advertisement
