9.
Continue with the Windows installation.
10.
After the installation is complete, verify that the RAID drivers loaded correctly by running the Device
Manager and checking for the Intel ICH8R/DO/DH SATA RAID Controller entry in the SCSI
and RAID controllers section. If the drivers did not load correctly, repeat this procedure.
11.
Using your deployment server, create a deployment image of the reference computer.
Building the Master Image – Online Prebuilt Operating Sys-
tem Image
Summary
Use this section when an installation of Windows XP that has already been built on a RAID capable com-
puter is used as the reference machine for the deployment images. You will insert the RAID drivers into a
live operating system image using the Sysprep program.
Prerequisites
•
Altiris Deployment Solution 6.5 or greater
•
Reference computer
•
CD-ROM drive
•
No RAID controllers required
•
Target computer - HP Compaq dc7700 Business PCs:
•
RAID capable
•
Two or more hard drives of the same size
•
PXE Boot enabled
•
RAID does not need to be enabled or configured prior to installation
•
Repset
•
Windows XP Professional Installation CD-ROM
•
RAID driver softpaq 33181
Instructions
1.
Boot the reference computer into Windows XP.
2.
Extract the softpaq to an available Windows computer.
Create a folder called Sysprep in the root directory
3.
4.
Insert the Windows XP Installation CD.
4