Table of Contents
Advertisement
Connect the water inlet hose for
2.
hot water and cold water to the tap
(26.4 mm = 3/4").
If there is no water tap for hot wa-
ter, only connect the water inlet
hose for cold water. Cover the hot
water connection on the appliance
in order to protect it from dirt.
Open the water taps carefully and
3.
check that the connection points
are tight.
Water outlet connection types
This information is intended to help
you to connect this appliance to the
water outlet.
ATTENTION!
When draining, the water outlet hose
is subject to water pressure and may
come loose from the installed con-
nection point.
Secure the water outlet hose
▶
against unintentional loosening.
Note: Observe the draining heights.
The maximum draining height is
100 cm.
Siphon
Secure the con-
nection point with
a (24–40 mm)
hose clamp.
Installation and connection en
Sink
Plastic pipe with
rubber sleeve or
gully
4.6 Aligning the appliance
In order to reduce noise and vibra-
tion and to prevent the appliance
from moving, align the appliance cor-
rectly.
Loosen the lock nuts using a WAF
1.
17 wrench by turning it in a clock-
wise direction.
Fix and secure
the water outlet
hose with an el-
bow
→ Page 29.
Fix and secure
the water outlet
hose with an el-
bow
→ Page 29.
15
Advertisement
Table of Contents
