Table of Contents
Advertisement
Parameter
Hot Plug Handling mode
Presence Detect Select
mode
Preferred IO Device
Loopback Mode
CV test
CAC Weight Adjustment
SEV-SNP Support
SRIS
EDC Control
Description
Controls the Hot Plug Handling mode.
Options available: Auto, A0 Mode, OS First (No Error Handling),
OS First (Error Handling-Not Implemented), Firmware First (Not Implemented).
Default setting is Auto.
Controls the Presence Detect Select mode.
Options available: Auto, OR, AND. Default setting is Auto.
Configures Preferred IO Device.
Options available: Auto, Manual. Default setting is Auto.
Enabled/Disabled PCIe Loopback mode.
Options available: Auto, Enabled, Disabled. Default setting is Auto.
Set this to Enabled to support running PCIECV tool.
Auto: preserve hardware defaults.
Options available: Auto, Enabled, Disabled. Default setting is Auto.
EDC Mode select.
Options available: Auto, Enabled, Disabled. Default setting is Auto.
Options available: Enable, Disable. Default setting is Enable.
Options available: Auto, Enable, Disable. Default setting is Auto.
Options available: Auto, Enable, Disable. Default setting is Auto.
- 105 -
BIOS Setup
Advertisement
Table of Contents
