Advertisement
ACTpro200
2 Door Station & Power Supply
____________________________________________________________________________________
Features
This product consists of a 2-door controller housed inside a metal cabinet,
complete with a monitored power supply. The unit is designed to connect to
ACT2000 and ACT3000 controllers on the Door Station RS-485 network.
The assembly as supplied provides the following features:
• 18 swg Mild Steel Cabinet with hinged lid with space for 2 7Ahr batteries
• 3 Amp Power Supply with battery backup provision (Batteries not supplied)
• Monitored power supply with automatic battery test
• 2 fused outputs for door locks
• PSU status (AC fault, battery low ) reported to controller and to ACTWinPro
• Deep-Discharge protection of batteries provided
• 20mm 'knockouts' provided for external wiring at top and sides
• 7 40mm holes in the back of the cabinet for rear wiring entry
• Wiring Instructions on label inside front lid.
• Lid to accommodate two standard DS100 units
www.accesscontrol.ie
All manuals and user guides at all-guides.com
12V 7AHr
AC AC E
AC AC E
12V 0V 12V 0V
12V 0V 12V 0V
12V 7AHr
+353 1 466 2570
Advertisement
