1. Manuals
  2. Brands
  3. MiTAC Manuals
  4. Touch Panel
  5. P210-10AI
  6. Product manual

MiTAC P210-10AI Product Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
MiTAC Panel PC System
P210-10AI
Product Guide V1.1

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the P210-10AI and is the answer not in the manual?

Questions and answers

Related Manuals for MiTAC P210-10AI

Summary of Contents for MiTAC P210-10AI

  • Page 1 MiTAC Panel PC System P210-10AI Product Guide V1.1...
  • Page 2 Front View Rear View...

  • Page 3: Bottom View

    Bottom View Mechanical Dimension P210-10AI dimension: 508.3mm x 308.4.8mm x 68mm...

  • Page 4: Product Specifications

    Product Specifications DISPLAY TYPE 21.5" TFT-LCD MAX. RESOLUTION 1920 x 1080 MAX. COLORS 16.7M (8 bit / color) LUMINANCE (cd/m2) VIEWING ANGLE 170° / 170° (H/V) LED BACKLIGHT 30,000 LIFETIME (hrs) HIGH BRIGHTNESS Option TYPE P-CAP TOUCH SCREEN TOUCH SCREEN True-flat 10 points AR/AG Option...
  • Page 5 CHIPSET Intel® SoC Integrated DDR3L 1866 MHz / 2 x 204-pin SO-DIMM / Max. 8GB (Non- SYSTEM MEMORY ECC) ETHERNET 2 x Intel® I211-AT / I210-AT Giga LAN 1 x 3-pin Phoenix type terminal block DC input / 2 x RS232 / 2 x RJ45 / 1 x 8bit GPIO terminal block / 1 x DisplayPort 1.2 / 1 x 2- I/O PORT pin remote power on/off / 1 x DC Jack / 4 x USB 3.0 / 1 x HDMI...
  • Page 6 CE / FCC Class B FRONT PANEL IP65 Compliant PROTECTION...
  • Page 7 Quick Installation Guide Remove 10pcs rear cover screws. (Torque 4.5 +/-0.5 Kgf-cm) Open rear cover Disassemble the HDD bracket. (Torque 4.5 +/-0.5 Kgf-cm) Install HDD with the screws in AK. (Torque 4.5 +/-0.5 Kgf-cm)
  • Page 8 Install HDD bracket and connect the cables. (Torque 4.5 +/-0.5 Kgf-cm) Install SODIMMs Install antennas in rear cover (option). (Torque 4.5 +/-0.5 Kgf-cm) Install WIFI card and connect the antennas. (option) (Torque 4.5 +/-0.5 Kgf-cm) Connect LVDS cable, backlight cable and TP cable before secure the rear cover...
  • Page 9 Remove the protection of thermal pad release paper before the assembly of rear cover Secure 10pcs rear cover screws. (Torque 4.5 +/-0.5 Kgf-cm) [Note] need manually install drivers Please check the latest drivers on MiTAC official website http://www.mitacmct.com/IndustrialPanelPC=P210-10AI=P210-10AI=downloads=EN...
  • Page 10 Back Panel Connectors 12V 2-PIN DC-in M.2 Key-E SATA 7-Pin Connector Com2 RS232 Power Select SATA Power Connector...
  • Page 11 SO-DIMM slot CPU Fan Header System Fan Header Chassis Front I/O Header LVDS Connector (eDP Connector at the bottom side) Panel Power LCD Panel Power Select Inverter Power Select USB 2.0 Header M.2 Key-B Parallel port/ MiAPI Header CMOS Reset Legacy I/O Header COM1 RS232 COM1 RS232 Power Select...
  • Page 12 Table 1: 40-pin LVDS connector pin-out eDP feature: 40-pin eDP connector must be right-angled, single-row shrouded colored black, as shown in Figure 2 (part number reference: ACES 50203-04001-001). Figure 2: Panel 40-pin LVDS connector Table 2: 40-pin eDP connector pin-out...
  • Page 13 Figure 3: Panel LCD voltage selection header (Location Signal Name Description No pin 3.3V 3.3V option 12V option LCD_VCC Send voltage to connector No pin 5V option (default) Table 3: Panel LCD voltage selection header pin-out (Location Figure 4: Backlight inverter voltage selection header(Location...
  • Page 14 Pin Signal Description 1 Key No pin 2 5V 5V option (default) 3 8v~24V Vin option same as DC-IN power rail 4 BKLT_PWR Send voltage to connector 5 Key No pin 6 12V 12V option Table 4: Backlight inverter voltage selection header pin-out(Location LVDS inverter power header pin-out (part number reference: Foxconn HF5508).
  • Page 15 5 BKLT_GND/Brightness_GND Ground (shared) 6 BKLT_GND/Brightness_GND Ground (shared) 7 Brightness_Up Panel brightness increase 8 Brightness_Down Panel brightness decrease Table 5: 8-pin FPD power connector pin-out Figure 6: Front panel audio header Pin Signal name Description 1 MIC Front panel microphone input signal (biased when supporting stereo microphone) 2 AUD_GND Ground used by analog audio circuits 3 MIC_BIAS...
  • Page 16 Pin Signal name Description 1 PORT 1L Analog Port 1 - Left channel (Microphone) 2 GND Ground 3 PORT 1R Analog Port 1 - Right channel (Microphone) Active low signal that signals BIOS that an Intel® HD Audio dongle is connected to the analog header.
  • Page 17 3 Front_R+ Analog front right (differential positive) Analog front right (differential 4 Front_R- negative) Table 7: Internal stereo speakers header pinout Figure 8:SATA Power Cable pin-out Signal Name Description VCC3 Power VCC3 Power VCC3 Power Ground Ground Ground Power Power Power Ground Ground...
  • Page 18 +12V Power +12V Power Table 8:SATA Power Cable signals Figure 9:SATA Header pin-out Signal Name Description Ground SATAHDR_TXP0_C SATA DATA Transmit(positive) SATAHDR_TXN0_C SATA DATA Transmit(negative) Ground SATAHDR_RXN0_C SATA DATA Receive(negative) SATAHDR_RXP0_C SATA DATA Receive(positive) Ground Table 9:SATA Header signals...
  • Page 19 Figure 10: Front panel USB header pin-out Pin Signal Pin Signal +5V DC +5V DC Data (negative) Data (negative) Data (positive) Data (positive) Ground Ground Key (no pin) No Connect Table 10: Front panel USB header signals Figure 11: Front panel main header pin-out Pin Signal Name Description Signal Name...
  • Page 20 GROUND Ground POWER_SWITCH# [In] Power switch RESET_SWITCH# [In] Reset switch GROUND Ground +5V_DC Power No pin Table 11: Front panel main header signals Figure 12: serial port pin out Signal Signal COM3_P1_40mils DCD (Data Carrier Detect) NRX3 RXD# (Receive Data) NTX3 TXD# (Transmit Data) NDTR3...
  • Page 21 Figure 13: power RS232 header pin-out J26 pin out V_12P NDCD1 COM1_P9 V+5P J27 pin out V_12P NRI2 COM2_P9 V+5P Table 13: power RS232 Serial port header signals...
  • Page 22 Figure 14: Parallel port header pin-out Standard Signal Name ECP Signal Name EPP Signal Name STROBE# STROBE# WRITE# AUTOFD# AUTOFD#, HOSACK DATASTB# FAULT# FAULT#, PERIPHREQST# FAULT# INT# INT#, REVERSERQST# RESET# SLCTIN# SLCTIN# ADDRSTB# GROUND GROUND GROUND GROUND GROUND GROUND GROUND GROUND GROUND GROUND...
  • Page 23 Standard Signal Name ECP Signal Name EPP Signal Name GROUND GROUND GROUND BUSY BUSY#, PERIPHACK WAIT# GROUND GROUND GROUND PERROR PE, ACKREVERSE# GROUND GROUND GROUND SELECT SELECT SELECT KEY (no pin) KEY (no pin) KEY (no pin) Table 24: Parallel port header signals Figure 15: Clear CMOS CMOS Jumper Header location...
  • Page 24 Figure 16: AT/ATX mode header pin-out AT/ATX Jumper Header location Default Pin2 and Pin3 Auto PWR ON Pin1 and Pin2 Table 46: AT/ATX mode header pin-out Figure 17: CPU fan header Signal Ground +12V CPU_FAN_TACH CPU_FAN_CTRL Table 57: Figure 27: CPU fan header...
  • Page 25 Figure 18: system fan header Signal Ground +12V SYSFANIN Table 68: System fan header Figure 19: M.2 E key slot For wireless pin-out...
  • Page 26 Table 19: M.2 E key slot For wireless signals Figure 20: M.2 B key slot for storage pin-out Signal Name Signal Name CONFIG_3 +Vcc(3.3v)
  • Page 27 +Vcc(3.3v) POWER_OFF# W disable USB D0+ 10 GPIO USB D0- 12 Module Key 13 Module Key 14 Module Key 15 Module Key 16 Module Key 17 Module Key 18 Module Key 19 Module Key 20 X 22 X 23 X 24 X 25 X 26 X...
  • Page 28 37 X 38 DEVSLP 39 GND 40 X 41 SATA B+ 42 X 43 SATA B- 44 X 45 GND 46 X 47 SATA A- 48 X 49 SATA A+ 50 Platform Reset 51 GND 52 Clock request 53 REFCLKN 54 PCIE_WAKE 55 REFCLKP 56 X...
  • Page 29 71 GND 72 +Vcc(3.3v) 73 GND 74 +Vcc(3.3v) 75 GND Table 20: M.2 B key slot For storage signals The MiAPI port header must be 2x13, 2.54mm pitch, colored pink and keyed at pin 26, as defined in Table 24: Parallel port header signals Signal Name Signal Name...
  • Page 30 MAPI_GPIO10 22 GND 23 SMB_MAIN_DATA 24 GND 25 SMB_MAIN_CLK 26 KEY (no pin) Table 21: MiAPI header signals (8bit GPIO terminal block) (3-pin Phoenix type terminal block DC input)
  • Page 31 (2pin terminal block) PIN Signal name ground Power switch...
  • Page 32 MITAC Embedded System P210-10AI BIOS Specifiction...
  • Page 33 Main Page Main Advanced Chipset Security Boot Save & Exit BIOS Information Item help BIOS Vender American Megatrends Core Version 5.12 Compliancy UEFI 2.5; PI 1.4 BIOS Version D7670X03 Build Date 11/07/2016 Processor Information Genuine Intel® CPU @ 1.50GHz →←: Select Screen SATA Devices ↑↓: Select Item SATA Port0...
  • Page 34 System Date [Mon, mm/dd/yyyy] System Time [hh:mm:ss] Version 2.18.1263. Copyright (C) 2017 American Megatrends, Inc. Field Name BIOS Vender Default Value AMI Megatrends Comment This field is not selectable. There is no help text associated with it. Field Name Core Version Default Value 5.12 Comment...
  • Page 35 Default Value Display build time of the BIOS Comment This field is not selectable. There is no help text associated with it. Field Name Processor Information Value Display the installed CPU brand. Comment This field is not selectable. There is no help text associated with it. Field Name SATA port 0 Value...
  • Page 36 Comment This field is not selectable. There is no help text associated with it. Field Name System Language Default Value [English] Possible Value [English] Help Choose the system default language Field Name System Date Default Value [xxx, mm dd yyyy] Possible Value [xxx, xx:xx:xxxx] Help...

  • Page 37: Advanced Page

    Advanced Page Main Advanced Chipset Security Boot Save & Exit LAN1 [Enable] Item help LAN2 [Enable] Wireless LAN RF [Enable] Intel(R) I211 Gigabit Network Connection -xx:xx:xx:xx:… Intel(R) I211 Gigabit Network Connection -xx:xx:xx:xx:… Driver Health ►ACPI Settings ►SMART settings ►NCT6104DSEC Super IO Configuration ►NCT6793D Super IO Configuration ►S5 RTC Wake Settings →←: Select Screen...
  • Page 38 Field Name LAN1 Default Value Enabled Possible Value Disabled Enabled Help Enable/Disable LAN1 Field Name LAN2 Default Value Enabled Possible Value Disabled Enabled Help Enable/Disable LAN2 Field Name Wireless LAN RF Default Value Enabled Possible Value Disabled Enabled Help Enable/Disable Wireless Lan RF Field Name Intel(R) I211 Gigabit Network Connection -xx:xx:xx:xx:…...
  • Page 39 Help Provides Health Status for the Drivers/Controllers Field Name ACPI Settings Help System ACPI Parameters. Comment Press Enter when selected to go into the associated Sub-Menu. Field Name SMART Settings Help System SMART settings. Comment Press Enter when selected to go into the associated Sub-Menu. Field Name NCT6104DSEC Super IO Configuration Help...
  • Page 40 Field Name CPU Configuration Help CPU Configuration Parameters. Comment Press Enter when selected to go into the associated Sub-Menu. Field Name Network Stack Configuration Help Network stack Settings. Comment Press Enter when selected to go into the associated Sub-Menu. Field Name Platform Trust Technology Help Platform Trust Technology...
  • Page 41 Intel(R) I211 Gigabit Network Connection-xx:xx:xx:xx:… Main Advanced Chipset Security Boot Save & Exit ►NIC Configuration Item help Blink LEDS UEFI Driver Intel(R) PRO/1000 7.0 Device Name Intel(R) I211 Gigabit….. Chip Type Intel i211 →←: Select Screen PCI Device ID 1539 ↑↓: Select Item PCI address 01:00:00...
  • Page 42 Default Value Possible Value 0~15 Help Identify the physical network port by blinking the associated LED. Field Name UEFI Driver Default Value Intel(R) PRO/1000 7.0… Comment This field is not selectable. There is no help text associated with it. Field Name Device Name Default Value Intel (R) I211 Gigabit…...
  • Page 43 Default Value [Disconnected] Comment This field is not selectable. There is no help text associated with it. Field Name MAC Address Default Value XX:XX:XX:XX:XX:XX Comment This field is not selectable. There is no help text associated with it.
  • Page 44 NIC configuration 2.2.1 Main Advanced Chipset Security Boot Save & Exit Item help Link Speed [Auto Negotiated] Wake On Lan [Enable] →←: Select Screen ↑↓: Select Item Enter: Select +/- : Change Opt F1: General Help F2: Previous Values F3: Optimized Defaults F4: Save &...
  • Page 45 100 Mbps Half 100 Mbps Full Help Specifies the port speed used for the selected boot protocol. Field Name Wake On LAN Default Value Enable Possible Value Enable Disable Help Enables the server to be powered on using an in-band magic packet. Intel(R) I211 Gigabit Network Connection-xx:xx:xx:xx:…...
  • Page 46 MAC Address 00:22:4D:B8:C3:48 F3: Optimized Defaults F4: Save & Reset ESC: Exit Version 2.18.1263. Copyright (C) 2017 American Megatrends, Inc. Field Name NIC Configuration Help Click to configure the network device port. Comment Press Enter when selected to go into the associated Sub-Menu. Field Name Blink LEDS Default Value...
  • Page 47 Field Name PCI Device ID Default Value 1539 Comment This field is not selectable. There is no help text associated with it. Field Name PCI Address Default Value 01:00:00 Comment This field is not selectable. There is no help text associated with it. Field Name Link Status Default Value...
  • Page 48 NIC configuration 2.3.1 Main Advanced Chipset Security Boot Save & Exit Item help Link Speed [Auto Negotiated] Wake On Lan [Enable] →←: Select Screen ↑↓: Select Item Enter: Select +/- : Change Opt F1: General Help F2: Previous Values F3: Optimized Defaults F4: Save &...

  • Page 49: Driver Health

    100 Mbps Half 100 Mbps Full Help Specifies the port speed used for the selected boot protocol. Field Name Wake On LAN Default Value Enable Possible Value Enable Disable Help Enables the server to be powered on using an in-band magic packet. Driver health Main Advanced...
  • Page 50 F2: Previous Values F3: Optimized Defaults F4: Save & Reset ESC: Exit Version 2.18.1263. Copyright (C) 2017 American Megatrends, Inc. Field Name Intel(R) PRO/1000 7.3.20 PCI-E Help Provides Health Status for the Drivers/Controllers Comment Press Enter when selected to go into the associated Sub-Menu. Field Name Intel(R) PRO/1000 7.3.06 PCI-E Help...
  • Page 51 Intel(R) PRO/1000 7.3.06 PCI-E 2.4.1 Main Advanced Chipset Security Boot Save & Exit Controller 73999398 Child 0 Healthy Item help Intel(R) I211 Gigabit Network Connection Healthy →←: Select Screen ↑↓: Select Item Enter: Select +/- : Change Opt F1: General Help F2: Previous Values F3: Optimized Defaults F4: Save &...
  • Page 52 Field Name Intel(R) I211 Gigabit Network Connection Help Provides Health Status for the Drivers/Controllers Comment This field is not selectable. There is no help text associated with it. Intel(R) PRO/1000 7.3.06 PCI-E 2.4.2 Main Advanced Chipset Security Boot Save & Exit Controller 73999398 Child 0 Healthy Item help...

  • Page 53: Acpi Settings

    Controller xxxxxxxx Child 0 Field Name Help Provides Health Status for the Drivers/Controllers Comment This field is not selectable. There is no help text associated with it. Field Name Intel(R) I211 Gigabit Network Connection Help Provides Health Status for the Drivers/Controllers Comment This field is not selectable.
  • Page 54 F4: Save & Reset ESC: Exit Version 2.18.1263. Copyright (C) 2017 American Megatrends, Inc. Field Name Enable ACPI Auto Configuration Default Value [Disabled] Possible Value Enabled Disabled Help Enables or Disables BIOS ACPI Auto Configuration. Field Name Enable Hibernation Default Value [Enabled] Possible Value Enabled...

  • Page 55: Smart Settings

    SMART Settings Main Advanced Chipset Security Boot Save & Exit SMART Settings Item help SMART Self Test [Disabled] →←: Select Screen ↑↓: Select Item Enter: Select +/- : Change Opt F1: General Help F2: Previous Values F3: Optimized Defaults F4: Save & Reset ESC: Exit Version 2.18.1263.
  • Page 56 NCT6104DSEC Super IO Configuration Main Advanced Chipset Security Boot Save & Exit NCT6104DSEC Super IO Configuration Item help Super IO chip NCT6104DSEC ►Serial Port 1 Configuration" ►Serial Port 2 Configuration" ►Serial Port 3 Configuration" ►Serial Port 4 Configuration" →←: Select Screen ↑↓: Select Item Enter: Select +/- : Change Opt...
  • Page 57 Field Name Serial Port 2 Configuration" Help Set Parameters of Serial Port 2 (COMB) Comment Press Enter when selected to go into the associated Sub-Menu. Field Name Serial Port 3 Configuration" Help Set Parameters of Serial Port 3 (COMC) Comment Press Enter when selected to go into the associated Sub-Menu.
  • Page 58 F1: General Help F2: Previous Values F3: Optimized Defaults F4: Save & Reset ESC: Exit Version 2.18.1263. Copyright (C) 2017 American Megatrends, Inc. Field Name Serial Port Default Value Enabled Possible Value Disabled Enabled Help Enable or Disable Serial Port (COM) Field Name Device Settings Default Value...
  • Page 59 →←: Select Screen ↑↓: Select Item Enter: Select +/- : Change Opt F1: General Help F2: Previous Values F3: Optimized Defaults F4: Save & Reset ESC: Exit Version 2.18.1263. Copyright (C) 2017 American Megatrends, Inc. Field Name Serial Port Default Value Enabled Possible Value Disabled...
  • Page 60 Serial port 3 Configuration 2.7.3 Main Advanced Chipset Security Boot Save & Exit Serial Port 3 Configuration Item help Serial Port [Enabled] Device Settings IO=258h; IRQ=11; Com3 set to [3T/5R RS-232] →←: Select Screen ↑↓: Select Item Enter: Select +/- : Change Opt F1: General Help F2: Previous Values F3: Optimized Defaults...
  • Page 61 Help Enable or Disable Serial Port (COM) Field Name Device Settings Default Value IO=258h; IRQ=11; Comment This field is not selectable. There is no help text associated with it. Field Name Com3 set to Default Value 3T/5R RS-232 Possible Value 1T/1R RS-422 3T/5R RS-232 1T/1R RS-485 TX ENABLE Low Active...
  • Page 62 Serial port 4 Configuration 2.7.4 Main Advanced Chipset Security Boot Save & Exit Serial Port 4 Configuration Item help Serial Port [Enabled] Device Settings IO=260h; IRQ=11; Com4 set to [3T/5R RS-232] →←: Select Screen ↑↓: Select Item Enter: Select +/- : Change Opt F1: General Help F2: Previous Values F3: Optimized Defaults...
  • Page 63 Help Enable or Disable Serial Port (COM) Field Name Device Settings Default Value IO=260h; IRQ=11; Comment This field is not selectable. There is no help text associated with it. Field Name Com4 set to Default Value 3T/5R RS-232 Possible Value 1T/1R RS-422 3T/5R RS-232 1T/1R RS-485 TX ENABLE Low Active...
  • Page 64 NCT6793D Super IO Configuration Main Advanced Chipset Security Boot Save & Exit NCT6793D Super IO Configuration Item help Serial Port 1 [Enabled] Serial Port 2 [Enabled] Parallel Port [Enabled] →←: Select Screen Device Mode [STD Printer Mode] ↑↓: Select Item Enter: Select +/- : Change Opt F1: General Help...
  • Page 65 Possible Value Enabled Disabled Help Enable or Disable Serial Port (COM) Field Name Serial Port 2 Default Value [Enabled] Possible Value Enabled Disabled Help Enable or Disable Serial Port (COM) Field Name Parallel Port Default Value [Enabled] Possible Value Enabled Disabled Help Enable or Disable Parallel Port (LPT/LPTE)
  • Page 66 ECP-1.7 and SPP Mode Help Change the Printer Port mode. Comment SKU-S did not have Parallel port menu...
  • Page 67 S5 RTC Wake Settings(No function when DeepSx Power Policies enabled) Main Advanced Chipset Security Boot Save & Exit Wake system from S5 [Disabled] Item help Wake up hour Wake up minute Wake up second →←: Select Screen ↑↓: Select Item Enter: Select +/- : Change Opt F1: General Help...
  • Page 68 Fixed Time Dynamic Time Help Enabler or disable System wake on alarm event, Select FixedTime, system will wake on the hr::min::sec specified. Select DynamicTime , system will wake on the current time + Increase minute (s) Field Name Wake up hour(Show when Wake system from S5 set to Fixed Time) Default Value Possible Value...

  • Page 69: Cpu Configuration

    CPU Configuration Main Advanced Chipset Security Boot Save & Exit CPU Configuration Item help Intel(R) Core(TM) CPU [CPU NAME] @ [CPU Freq.] GHz CPU Signature 406c3 Microcode Patch Max CPU Speed 1600 MHz Min CPU Speed 480 MHz Processor Cores Intel HT Technology Not Supported Intel VT-x Technology...
  • Page 70 +/- : Change Opt F1: General Help F2: Previous Values F3: Optimized Defaults F4: Save & Reset ESC: Exit Version 2.18.1263. Copyright (C) 2017 American Megatrends, Inc. Field Name CPU Configuration Default Value [Intel CPU Brand String] Comment This field is not selectable. There is no help text associated with it. Field Name CPU Signature Default Value...
  • Page 71 Field Name Min CPU Speed Default Value Displays the Min CPU Speed Comment This field is not selectable. There is no help text associated with it. Field Name Processor Cores Default Value Displays number of cores. Comment This field is not selectable. There is no help text associated with it. Field Name Intel HT Technology Default Value...
  • Page 72 Default Value L1 Code Cache Size Comment This field is not selectable. There is no help text associated with it. Field Name L2 Cache Default Value L2 Cache Size Comment This field is not selectable. There is no help text associated with it. Field Name L3 Cache Default Value...

  • Page 73: Network Stack Configuration

    Network Stack Configuration 2.10 Main Advanced Chipset Security Boot Save & Exit Item help Network stack [Enabled] Ipv4 PXE Support [Enabled] Ipv6 PXE Support [Enabled] →←: Select Screen ↑↓: Select Item Enter: Select +/- : Change Opt F1: General Help F2: Previous Values F3: Optimized Defaults F4: Save &...
  • Page 74 Default Value [Enabled] Possible Value Disabled Enabled Help Enable Ipv4 PXE Boot Support. If disabled IPV4 PXE boot option will not be created. Field Name Ipv6 PXE Support Default Value [Enabled] Possible Value Disabled Enabled Help Enable Ipv6 PXE Boot Support. If disabled IPV6 PXE boot option will not be created.
  • Page 75 →←: Select Screen ↑↓: Select Item Enter: Select +/- : Change Opt F1: General Help F2: Previous Values F3: Optimized Defaults F4: Save & Reset ESC: Exit Version 2.18.1263. Copyright (C) 2017 American Megatrends, Inc. Field Name Compatibility Support Module Configuration Field Name fTPM Support Default Value...
  • Page 76 Chipset Main Advanced Chipset Security Boot Save & Exit Restore AC Power Loss [Power Off] Item help DeepSx Power Policies [Disabled] Output Panel Type [Disable] Front Panel Auido [Auto] DVMT Pre-Allocated [64M] DVMT Total Gfx Mem [256MB] Wake On Lan [Enable] OS Selection [Windows]...
  • Page 77 Default Value [Power Off] Possible Value Power off Power on Last State Help Select AC power state when power is re-applied after a power failure. Field Name DeepSx Power Policies Default Value Disabled Possible Value Disabled Enabled Help Configure the DeepSx Mode configuration. Note When enabled, “Wake On Lan”...
  • Page 78 1366x768 LVDS 1680x1050 LVDS 1440x900 LVDS 1600x900 LVDS 1280x800 LVDS 1920x1080 LVDS Help Select LVDS panel used by Internal Graphics Device by selecting the appropriate setup item. Comment This field only show when Output Panel Type set to LVDS Field Name Front Panel Audio Default Value High Definition Front Panel...
  • Page 79 Default Value [256MB] Possible Value 128MB /256MB /Max Select DVMT 5.0 Total Graphic Memory size used by the Internal Help Graphics Device. Field Name Wake On Lan Default Value Enabled Possible Value Disabled Enabled Help Enable or Disable the Wake on Lan Field Name OS Selection Default Value...
  • Page 80 Security Main Advanced Chipset Security Boot Save & Exit Password Description Item help If Only the Administrator's password is set then this only limits access to Setup and is only asked for when entering Setup If ONLY the User’s password is set, then this Is a power on password and must be entered to boot or enter Setup.
  • Page 81 Version 2.18.1263. Copyright (C) 2017 American Megatrends, Inc. Field Name Setup Administrator Password Help Set Administrator Password Comment Press Enter when selected to go into the associated Sub-Menu. Field Name User Password Help Set User Password. Comment Press Enter when selected to go into the associated Sub-Menu. Field Name P0: Device Name Help...

  • Page 82: Hdd Security Configuration

    HDD Security Configuration Main Advanced Chipset Security Boot Save & Exit HDD Password Description Item help Allow Access to Set, Modify and Clear Hard Disk User and Master Password. User Password need to be installed for Enabling Security. Master Password can Be Modified only when successfully unlocked With Master Password in POST.

  • Page 83: Secure Boot Mode

    Version 2.18.1263. Copyright (C) 2017 American Megatrends, Inc. Field Name Set User Password Help Set HDD User Password Comment Press Enter when selected to go into the associated Sub-Menu. Secure Boot Mode Main Advanced Chipset Security Boot Save & Exit Item help System Mode Setup...
  • Page 84 F2: Previous Values F3: Optimized Defaults F4: Save & Reset ESC: Exit Version 2.18.1263. Copyright (C) 2017 American Megatrends, Inc. Note: Security boot will not effect by load default. Field Name System Mode Default Value Deployed Possible Value Deployed /User/Audit/Setup Comment This field is not selectable.
  • Page 85 Possible Value Enabled / Disabled Help Secure Boot activated when Platform Key(PK) is enrolled, System mode is User/Deployed, and CSM function is disabled Field Name Enter Audit Mode Possible Value Yes / No Help Enter Audit Mode.If a current System Mode is User – PK variable will be erased on transition to Audit Comment This filed only show when Secure Boot mode change from...
  • Page 86 Press Enter when selected to go into the associated Sub-Menu.

  • Page 87: Key Management

    Key Management Main Advanced Chipset Security Boot Save & Exit Provision Factory Default Keys [Disabled] Item help ►Install Factory Default Keys ►Save All Secure Boot Variables Secure Boot variable | size| key#| key source ►Platform Key(PK) ►Key Exchange Key ►Authorized Signatures ►Forbidden Signatures ►Authorized TimeStamps ►OsRecovery Signatures...
  • Page 88 F3: Optimized Defaults F4: Save & Reset ESC: Exit Version 2.18.1263. Copyright (C) 2017 American Megatrends, Inc. Field Name Provision Factory Default Key Default Value [Disabled] Possible Value Enabled Disabled Help Allow to provision factory default Secure Boot keys when System is in Setup Mode Field Name Install Factory Default Key...
  • Page 89 device Field Name Platform Key (PK) : 0 Possible Value Set New Key Append Key Help Enroll Factory Defaults or load keys from a file formatted as: 1.Public Key Certificate in: a)EFI_SIGNATURE_LIST, b)EFI_CERT_X509 (DER encoded), c)EFI_CERT_RSA2048 (bin), d)EFI_CERT_SHA256 (bin) 2.Authenticated UEFI Variable Key origin legend: Factory Default, Custom, Mixed * user modified via the Setup Field Name Key Exchange Key : 0...
  • Page 90 Append Key Help Enroll Factory Defaults or load keys from a file formatted as: 1.Public Key Certificate in: a)EFI_SIGNATURE_LIST, b)EFI_CERT_X509 (DER encoded), c)EFI_CERT_RSA2048 (bin), d)EFI_CERT_SHA256 (bin) 2.Authenticated UEFI Variable Key origin legend: Factory Default, Custom, Mixed * user modified via the Setup Field Name Authorized TimeStamps : 0 Possible Value...
  • Page 91 Boot Main Advanced Chipset Boot Security Save & Exit Boot Configuration Item help Setup Prompt Timeout Bootup NumLock State [On] Fast Boot [Enable] Boot mode select [UEFI] FIXED BOOT ORDER Priorities Boot Option #1 [Hard Disk] Boot Option #2 [CD/DVD] Boot Option #3 [USB Hard DIsk] Boot Option #4...
  • Page 92 UEFI USB Hard Disk Drive BBS Priorities F3: Optimized Defaults UEFI USB KEY Drive BBS Priorities F4: Save & Reset ESC: Exit Version 2.18.1263. Copyright (C) 2017 American Megatrends, Inc. Field Name Setup Prompt Timeout Default Value Possible Value 1~65535 Help Number of seconds to wait for setup activation key.
  • Page 93 Default Value [UEFI] Possible Value UEFI Help Select boot mode UEFI. Boot mode select = UEFI Field Name Boot Option #1 Default Value [Hard Disk] Possible Value CD/DVD, Hard Disk, Network, USB CD/DVD, USB Hard Disk, USB KEY, USB Floppy, USB Lan Help Set the system boot order Field Name...
  • Page 94 Possible Value CD/DVD, Hard Disk, Network, USB CD/DVD, USB Hard Disk, USB KEY, USB Floppy, USB Lan Help Set the system boot order Field Name Boot Option #5 Default Value [USB Key] Possible Value CD/DVD, Hard Disk, Network, USB CD/DVD, USB Hard Disk, USB KEY, USB Floppy, USB Lan Help Set the system boot order...

  • Page 95: Save And Exit

    Save & Exit Main Advanced Chipset Security Boot Save & Exit Save Options Item help Save Changes and Exit Discard Changes and Exit Save Changes and Reset Discard Changes and Reset Restore Defaults →←: Select Screen ↑↓: Select Item Enter: Select +/- : Change Opt F1: General Help F2: Previous Values...
  • Page 96 Field Name Save Options Field Name Save Changes and Exit Help Exit system setup after saving the changes. Field Name Discard Changes and Exit Help Exit system setup without saving any changes. Field Name Save Changes and Reset Help Reset the system after saving the changes. Field Name Discard Changes and Reset Help...

Table of Contents