HAMPTON BAY 65-7148B9 Use And Care Manual page 11

Installation(65-17148B5)
1
Attaching the legs to the top
□ Place the top ( M) on a soft surface.
□
Insert each leg (N) with shelf supports facing the
center into the four holes on the table top (M) as
shown.
□
Attach legs (N) to the table top (M) using bolts (CC)
and hand tighten. Do not tighten completely.
N
3
Adding the caps
□
Check and make adjustments as needed.
□
Fully tighten all the bolts with the Hex wrench (FF)
and cover the bolts (CC) with caps (EE).
□
Adjust leg levelers as required.
N
CC
N
M
EE
O
N
M
2
Attaching the shelf to the legs
□
Attach the shelf (O) to the legs (N) by aligning holes on the
shelf (O) with the holes on the legs (N). The shelf must be
attached as this image shown. Insert bolts (CC) with
washers (DD) and hand tighten.Do not tighten completely.
N
4
Completing the assembly
□
Place the table right side up.
□
This table is now ready for your enjoyment.
11
Please contact 1-855-HD-HAMPTON for further assistance.
CC
DD
N
O
M
HAMPTONBAY.COM