Table of Contents
Advertisement
global_main.book.book Page 36 Wednesday, February 16, 2022 4:05 PM
OPERATION
36
NOTE
- If the liquid fabric softener indicator
buttons indicator
blink and the chime
f
sounds, pour the fabric softener into the
compartment, up to the MAX line.
• The default settings are configured to dispense
the detergent of Dispenser 1 and the fabric
softener of Dispenser 2.
Changing Dispense Level for a Single
Load
1
Press the Power button.
2
Turn the knob to select the desired cycle.
3
Press the Dispenser 1 or Dispenser 2 button
to increase or decrease the dispensed amount
from the set defaults.
Buttons Indicator
*1 The default settings are configured to
dispense 42 ml of detergent and 30 ml of
softener for 4-6 kg of normally soiled
laundry.
4
Press the Start/Pause button.
and
g
*1
Dispensed Amount
More (110%)
Normal (100%)
Less (90%)
Off (0%)
NOTE
• Use the manufacturer's recommendations on
the detergent or fabric softener package when
setting the ezDispense amounts for a standard
4-6 kg load.
• Most cycles will automatically use the default
amounts you have set, indicated by the Normal
LED light on the Dispenser 1 and Dispenser 2
buttons.
• The Delicates, Hand/Wool, Sportswear, and
Tub Clean cycles turn the ezDispense function
off by default.
Changing Default Dispense
Amounts
The default settings are configured to dispense 42
ml of detergent and 30 ml of softener for 4-6 kg of
normally soiled laundry.
Detergent should be used according to the
instruction of the detergent manufacturer and
selected according to type, colour, soiling of the
fabric and the washing temperature.
1
Press the Power button.
2
Change default dispense amounts.
• Dispenser 1: Press and hold the Dispenser 1
button for 3 seconds.
• Dispenser 2: Press and hold the Dispenser 2
button for 3 seconds.
3
Turn the knob to increase or decrease the
amount of detergent or fabric softener. The
amount is shown in the display.
• The default amounts can be increased or
decreased in 1 ml increments, within a range
of 9 ml to 150 ml. The amount dispensed
may vary slightly depending on the model.
4
Save the default changes.
• Dispenser 1: Press and hold the Dispenser 1
button for 3 seconds.
• Dispenser 2: Press and hold the Dispenser 2
button for 3 seconds.
Advertisement
Table of Contents
